need help
keep getting a error support code 5011 need help
keep getting a error support code 5011 need help
I've only got about 6 hours into this nightmare. My scanner quit working after my beloved ISP had a hicup.I have my MF4890DW set up on Ethernet and it prints just fine, but it will not scan. I've reloaded all the programs and updates including the pa...
Hello:Brand new to the forum - just installed printer this afternoon. From my computer, all is fine - prints beautifully. From my wife's computer, all appears well - drivers downloaded, can hit "print" button, and diagalog box shows printer working. ...
All the time, it gives me many print outs unless I stop it manually. In addition, it does not print out properly. Right end is always missing. I really want to have helps for these issues.
I've used the color printing option before and had no issue, other than the ink smudging a little on dark tones. But I haven't printed color in about 2 months and now it will only print in shades of gray, black and white. The cartridges are still mos...
I have been trying to get my printer to scan to my email with no luck. My email is a gmail so I am not sure I am settign the remote UI up correctly. A few discussions I have found was to set the port, but there is no entry for port allocation. i was...
I cannot figure out how to duplex scan on the MF744cdw. Any suggestions?
I keep getting an error message when trying to print from my LBP622CDW. Connected via a wireless connection. Tried installing the printer following the task but get non-specific error message. It's never printed and brand new. ThanksAdam
Greetings all,About a month ago I needed to replace the right printhead. All seemed to go well until adjusting the printhead. It would not complete the alignment no matter what I did. Printing a nozzel check all looked good except the black line. Aft...
Hi i need some help if possible. i have a Surface Pro X which uses a windows 10 64x ARM. im finding that this might be causing the issue but any help is appreciated. i cannot install the driver for this printer online. it just promts "Could not insta...
Hello, I've recently bought a new machine for the front office desk which has the specified printer attached to it (Canon MF4150). Problem is the printer didn';t had any issues since im here like at least 2-3 years and now when I bought the new machi...
Worse thing. Can't get anyone from technical support because the voice promp keeps cutting me off and saying they didn't get the model number. So you give your model number. Then it cuts you off before you give your model number and says they didn...
I do not have internet and I'm not able to afford getting it. I have the above printer and would like to print using the on the go cable and hooking it into my android phone. However no matter how I try and print it it will not recognize the printer....
I had a paper jam on my printer, which I cleared, but now it is cycling through error message "Insert xxx toner correctly" for all 4 toner cartidges.I have tried reseating the cartridges, turned the unit off and on several times, but cannot clear the...
My Win 10 Dell Computer is plugged directly thru USB to my Canon MF644Cdw Aio printer. All functions have previously worked, but now The scan utility loaded on the Computer does not recognize the printer. Says "printer cable is unplugged."I have re-...
Subject | Author | Posted |
---|---|---|
02-17-2025 01:41 PM | ||
02-17-2025 12:41 PM | ||
02-17-2025 06:37 AM | ||
02-14-2025 12:30 PM | ||
02-12-2025 11:20 AM |
New to the community? Here's some information to help you get acquainted:
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.