MG5320
In mailing mode, placement of return address for # 10 envelope is incorrect, it places it 1.5" from left side. It should be near the left side. It looks like it's placing it on a small envelope! Where should I look for a default set up? TKS.
In mailing mode, placement of return address for # 10 envelope is incorrect, it places it 1.5" from left side. It should be near the left side. It looks like it's placing it on a small envelope! Where should I look for a default set up? TKS.
Hi, long story short, my Canon MX922 when I send to print the same image, on different type of papers, I get different results. If i send a image to print in Letter paper, it does print normal, and is everything ok with it.If i send the same image to...
The nozzle check is just fine, and text is just fine, but photos printed on the mx922 have no blacks. all the other colors are fine. The same photos printed to other printers are fine. It makes no difference what paper is selected.
The MG7120 connects to and printer on my home wireless network; however, the scanning function will not connect and Air Print will no longer work with any of the Apple iOS devices. This stared two days ago when I had to restore my operating system t...
I have a Canon iP7220 and almost started printing white paper but ink was out. I changed inkjet and it sputtered around for about five minutes and then printed out 7 sheets but all backwards, as in 7 - 1? What did I do wrong? Or what did it do wrong?...
My Canon MX430 series will not print from my MAC. not even test page. keeps saying 'filter failed' .... any advice.... Thank you!!!!
Hi,my printer will not power up correctly.it switches itself off after 2 seconds.Any thoughts??
I have a brand new MX 922. I have printed off about three or four files, then clicked on copy, copied one thing, and now it is stuck on copy and will not allow me to print from my Mac. There is sufficient ink. and paper. No jams. Please help.
Canon printer MG 7550 - while printing, I get the error-message: "Type of print head is incorrect. Install the correct print head". I bought and use this since printer 3/3/2015, and never had an error-message untill now. In the middle of a page it...
I have a Pixma MP610. When I scan a document, the result is much too light. I can use the MP NAvigator, open the scanner driver, set the darkness and contrast to make it darker, and scan, but for this I must go to the PC to start each scan with a cou...
My printer is a Canon MG3500. I have had problems printing so I replaced both ink cartridges although they were not used.The green light flashes continually and the printer does not respond to print commands.
Is there a way to access the print queue on the screen of the printer? Or can I only do that from a laptop? (I'm in an office setting)
Hi, When i print wirelessly there is no problem, however when i try to scan to PC, no matter i press the button on printer or select "document scan" from quick menu on PC, the printer has no response. only option left me to scan is scan to local USB....
Bought my new MX727 the other day seemed to set up ok - used it a fair amount in the first few days. Culminating in some photo-copying. Following day I cant seem to print anything - just sits in the out queue and never actually prints - the queue say...
Subject | Author | Posted |
---|---|---|
11-12-2024 05:23 PM | ||
11-12-2024 05:08 PM | ||
11-12-2024 04:17 PM | ||
11-11-2024 07:25 PM | ||
11-11-2024 06:55 PM |
New to the community? Here's some information to help you get acquainted:
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.