I have a hardly used Ds1 mkiii and still getting the hang of things and what it can do. I've noticed that after a shot, and bringing up the screen view, occasionally it has a 'block' of black with a perimeter of thin white, usually if it's a big are...
After I repaired an external flash sensor problem, I now have a problem. There is nothing to see on the LCD screen, neither live view nor the menus.The internal flash now works. The camera can take pictures and transfer them to the computer. All but...
I have tried everything... I love macro photography and the peaking would be very nice to use, but outdoors where it would be most necessary for wildlife photos, it's so dim, you cannot hardly see it. You can see it indoors fairly well. I ...
I purchased a Portkeys LP5Hii to work with my Canon R6ii for shooting video in Clog. No matter what monitor adjustments or LUTs I load, the image looks completely washed out and the waveform supports that as the blacks will no go below about 15 IRE. ...
I purchased a used EOS M200 which did not include the basic instruction manual. The only manual I am able to find online is the 522 page Advanced User Guide. Does anyone have suggestions as to where I can find the basic instruction manual? I’m nowher...
Just an FYI, but both the Canon EOS Rebel SL2 and the Canon EOS R10 appear to have the same bug whereby if an SD card with a partition table formatted as GPT is reformatted by the camera, then the card can no longer be read or mounted by Microsoft Wi...
Hello. I was just wondering why does this person's phot look so much more clear than the ones I take? Does his camera have a higher megapixle number? I also feel like I was in focus too. The moose is the one I found the other one is mine of the bird...
Updated, but not solved. The update will be here at the top in italics. Everything below italics is the original post. I have been in contact with Canon Tech Support - first by email. Three different technicians, a lot of back and forth questions ...
Has anyone had a issue with IS mode not being able to be switched on? My R5 mark ii will not let me enable the mode. I noticed everything I shoot is a bit blurry. I can use the same lens on my R6 and the IS mode enables and all my pictures look fanta...
I currently own Canon R50. I am using it mainly for shooting video. Which camera would you guys recommend me if i am going to shoot 90% of the time video. More specific wild-life and sports?
Hi all. I would like to ask something about switching between photo and video then back to photo. Is it possible to map to the record red button a custom video settings including the picture profile (e.g: c-log) so that when I am in photo mode and pr...
I recently completed a repair and cleaning for a lens and body, and the process was quick and easy. However, when following the recommended shipping instructions using the 'Canon Discount' for shipping through UPS, I was charged ~$140 for shipping a ...
Hello everyone! I have a Canon EOS 250D camera, purchased a year ago. But the new camera has started to act the same my previous camera after what I did replace it. It is quite hard to explain this problem but autofocus suddenly stops working as well...
I am just now making the switch from my old 5D mark III to a new R6 mark II and am having trouble with differences between the 2 when it comes to using the LCD screen. With my 5D, my preferred set up was to have the LCD always off unless I pressed th...
I bought a pair of OneOdio wired headphones for my Canon t3i camera. The headphones work on other devices, and the headphone jack works with my lavarlier mic, but I am not hearing any audio through the headphones when it is connected to my camera. Wh...
