Recently I downloaded CanoScan 5000/5000 F CD-ROM to test if this excellent scanner was still working. But I had to remove the TS9521C b/c it sprang into action each time I tried to scan with the CanoScan 5000 which never functioned after all that. S...
I removed a paper jam from the printer now it will not print. It keeps saying that the paper is not loaded into the tray correctly. I know that the paper is loading correctly. When I attempt to print the printer just makes noise and attempts to print...
As you can see on the right, the coloring, layout and lettering aren't in the same position as the original page as pictured on the left. Maybe it has something to do with printing lined paper before I got around with blank paper? I even tried clean...
I have a Canon MX922 printer that is about 5 years old. It wouldn't power up and I determined that it needed a new power supply. I got one and installed it. Now it does power up, but it is showing strange error messages that the print head is the ...
I have a MG2522 with a Mac running macOS Monterey 12.6. When I print something, it prints in the top left corner and is 4x3" in size. The paper size is set to A4 and the print preview shows it at the normal size.Can anyone tell me how to fix this?
Hi I have a Pixma MX922 printer that was gifted to me reading error code b200. I bought and replaced the print head but still having the same error code. Is there a way to reset it? Is there something else I can do? All new ink and have taken out/rep...
I have a working PIXMA iP8500 printer that needs new ink pads. Does anyone know if those can be purchased from somewhere? This printer has been pretty solid for years and I hate to get rid of it.
Hello Can I convert the tr7020a to an edible printer? If so, what edible ink cartridges can I use?
Hi all, I cannot find the driver of Canon MX360 to install on my macbook Ventura 13.5.1. Is there any support with this, please? Many thanks.
I have a Pixma TS3522 printer that cuts off the left border of all normal 8.5x11 documents I try to print. I'm running Windows 11 and this is via wireless. It has the latest drivers. Nothing seems to help, e.g. changing the settings to Fit to Page or...
Hello! My two-month old 8720 printer is having problems. When I turn it on, it blinks white three times, and then turns off. I've unplugged it for 15ish minutes, but it keeps doing this. Any ideas on how to fix this?
Hello!My Pixima is approximately two years old. After I replaced the ink a few weeks ago with genuine Cannon ink, I've noticed that the prints are inconsistent. The ink levels are all full but it looks like there's something stuck or the printer is s...
I don't want the printer to go off just because it has sat idle for a while. I tried the remedy of holding the Stop but for 18 flashes then pushing the colour button. Pushed and held stop.Light never flashed. anyway this process is for automatically...
All the ink levels are full. When I run a nozzle check, the black ink is completely absent. When I do a cleaning or deep cleaning, it stops just seconds into it and says Error 5200. So I turn off the printer and unplug it for more than 10 minutes. Wh...
