Desktop Inkjet Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 


IP8720 jams with 11 x 17 paper

I have a relatively new IP8720 printer. I specifically chose it because it will print 11 x 17 pages.It works perfectly, every time when printing 8-1/2 x 11 pages. Never once has it jammed with 8-1/2 x 11 paper.It paper jams every time I try to print ...

PaulBell by Apprentice
  • 2 replies

PIXMA MX922 PGBK Ink Won't Work

On my MX922 I can not get the PGBK to work. I have tried deep cleaning, replacement of ink cartridge. Nothing will help. If I want to print in black and white, I get a blank sheet. The only way I can get a page to print if it is all black printing is...

PIXMA MG2522 Persistent Paper Jam Message

Was printing just fine and then the printer started acting like it was jammed but then I’d get an error 1000 but it had paper. Then I cleaned the rollers as best as I could because it’s kinda hard to get in there but then I tried again and now it’s f...

Sahmto2 by Apprentice
  • 0 replies

PIXMA MG7520 printing much too small in Chrome on Mac

All of a sudden, Chrome pages print at about 1/4 size. This happens on multiple sites.I'm printing to an older Canon printer (MG7520).The same pages print properly from Chrome to a new Canon printer, and from Firefox and Safari to the old printer.I'v...

doray by Apprentice
  • 7 replies

Resolved! PIXMA G6020 Prints in Black Only

I'm having the same problem, but without a 5200 error. My PIXMA G6020 was printing just fine.Now it acts as if it were a "black ink only" printer. The diagnostic prints from ALL maintenance routines(head alignment, cleaning, deep cleaning, etc.) show...

ccnbigd by Apprentice
  • 9 replies

Pixma MP560 and Windows 11

I have a MP560 that was purchased by me in 2010 and it is still in brand new condition and works great!!Problem----I just purchased a new Dell Laptop with Windows 11 and I cannot get it to recognize the printer because the driver will not install--Al...

gmkat by Apprentice
  • 4 replies

PIXMA MG7720 error code 6000

Not knowing how this board works, I entered the following in General Printers.It should be here. Can a moderator fix it??Basic question from a newby...Options‎12-03-2020 03:46 PMI have a PIXMA MG7720. I've used it since 6/17, with no problems. I'm no...

dennism by Contributor
  • 4 replies
Getting started

New to the community? Here's some information to help you get acquainted:

11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!