I have tried several ways to print square (11x11") using my Pro-100 but each time the print comes out smaller, at approx. 7.5 x 7.5" I have tried this with both 12 x 12" and 13 x 19" paper loaded into the rear (top) feed. My settings (in Lightroom) a...
I've had an occasional problem with my Pro 10 printing dull images. I've learned, but trial and error, to fix this problem by rebooting my PC. If I go into screen saver mode, it seems to create dull images again. I use a datacolor Spyder to caliba...
I've had this printer about 10 days and had this issue since the start. The printer is leaving both horizontal and vertical black lines on paper and smears on the edge of paper. There appears to be quite a lot of the photo black ink on the waste spon...
Is there a driver that will work with apple's high sierra OS for my i9900? Thanks!
how do I stop printing old print orders? I want to empty the printing queue. It keeps printing the same photo over and over again and I'm wasting paper and ink.
Ansfer from canon for pro 10s :At this time, there are no plans to change the margin requirements when printing on fine art paper. These are, of course, the most expensive papers.And that kind of assertion is childish. I have two Ilford Fine art expe...
Hello,My Canon Pixma Pro 100 prints smaller photos just fine up to 11 x 17.I'm using Mac OS Mojave 10.14.5. Printing from Photoshop CS 6. I don't see a choice for 13 x 19 in the dialog. Following some bits of online advice.... I've reinstalled the l...
When I print from photoshop, I setup for a 13x19" paper size and 13x19" print size. But when the image prints, it leaves about a quarter inch margin all the way around. I would like to cut that at least in half. I cannot find a setting that is cau...
I have a Pixma Pro 10. When I print on non-Canon papers, I notice odd printing irregularities, especially in the sky. The blues in the sky lack the subtle tonal gradation that is clearly present when the image is viewed on the monitor, the colors are...
there are several paper type settingss....I am trying to print on a water color paper...I've noticed with different paper types - for instance - envelope versus photo glossy......the colors are way different...what is the best paper type setting?.......
Hi There and thanks in advance.Would someone be able to confirm if I am setting up the print steps correctly please as I am not happy with the end result.Please see image showing what I am doing.Photoshop cc – Canon imageprograf IPF6400 - hahnemuehl...
I have had the Pro 100 for 2 years and 3 months. It comes on, but the orange light blinks, it gives a "screechy and scratching noise", shakes pretty bad and then stops doing anything. I have tried everything i know to solve the problem. Does anyo...
I just purchased a Canon Pixma Pro-10. It replaced my Pro-1 that took a dump. I print a lot of 8x10s. Sometimes my printer prints blanks of photos that I know I was able to print with my Pro-1? I don't understand. Is there a way I can change the...
Posting to see if anyone else has been having any issues of (15 mil) Scrim Vinyl Banner prints not drying properly from the Pro series? We have updated the media profiles (thru MCT) on both the plotter and driver to no avail. Anything printed on this...
I would like to know if anyone with this printer has had a similar message appear after performing an auto alignment?This printer was just set up days ago and arrived damaged from shipping to the bottom guide assemblies. In the meanwhile I have set u...
