Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MF4570DN not scanning

Hello!  Sometiemes my MF4570DN won't scan apparently out of the blue.  It says no spported scanners are installed.   I'm running windows 10 on a laptop and the printer is installed on the network.  I have to uninstall both the toolbox and the drivers...

Capture.PNG
alextat by Apprentice
  • 3480 Views
  • 1 replies
  • 1 likes

Set Scan Destination Folder for MB2720 - Mac OS

Hi, I couldn't set a Destination Folder on my Macbook Air for scan. Whenever I tried to add a folder on my Mac, the folders in pop-up window are all grayed out. I simply cannot select any folder. The printer is Canon MB2720 and OS version is MacOS 10...

Canon MB2720.jpg

Help with Canon MF8580Cdw

*** Updated Notes below**** I have a Canon MF8580Cdw printer in my office that prints with to much "red" The printer will print what I tell it too but the color calibration is off. Oranges Print Red. Colors seem soft, Browns print red. basically ever...

IR C2220 to set to default black and white for OSX

We are using IR Canon 2220 in our organization, we want this printer to set the default to black and white print for some OSX users so they can only print black and white and we want some users to print both color and B/W. help me to set this in OSX ...

lokeshp by Apprentice
  • 3321 Views
  • 2 replies
  • 0 likes

Resolved! Canon IR1133 - waiting to print message

HelloI have an issue with our IR1133 printer that happened after replacement of catridge. The problem is in the fact that the printer does not print any job and show the message waiting to print. When I go to see the print job on the printer I find a...

lidwa by Apprentice
  • 5726 Views
  • 2 replies
  • 0 likes

MF4370dn Scanner/Printer/Copier?

We have a Canon I-Sensys MF4370dn Printer/Scanner/Copier at the office. I can scan using my personal software. How can I setup the MF4370dn in order for everyone to be able to scan from their computers in their office? At this stage everyone can prin...

Martie by Apprentice
  • 3424 Views
  • 1 replies
  • 0 likes

image class mf8280cw just stopped printing -- mac

I've been printing and using this multi-function unit for several years without problem (generally --- separate post re recent color printing issues) until just now. The printer is connected to and is recognized by my mac. The print job is also recog...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.