PIXMA GM4070 How to reset waste ink pad error
How to Reset Waste ink Pad Error on GM 4070
Posts
PIXMA MX490 Printer is performing another operation
I have a Pixma MX490 printer. When I try to print a document, I get a message saying that the printer is performing another operation. The printer will not print the document. Any suggestions?
Resolved! Scanner on PIXMA MG7520 not working
Pixma MG7520 Mac OS 15.6 The printer is working without issue but the scanner is no longer identified/accessible. Issues began after latest OS upgrade where scanner error would not save the scanned file claiming network or connection error. Downloade...
Firmware and software updates for G7000
I looked through the manual trying to figure out how to check for updates for the IJ Utility and my G7000 printer. After a lot of searching all I found was how to check or get firmware updates IF my G7000 is connected to the internet via a LAN or Wi-...
PIXMA TS6420 - Randomly Prints Lines Of Faint And Broken Text
Getting some strange results recently from my Canon TS6400 combo printer scanner. Printed text documents randomly have broken and/or lightly printed areas horizontally in the text. Using only genuine Canon 260XL and 261XL cartridges. Printing a singl...
PIXMA TS3522 flashing between orange and green light 10 times
PIXMA TS3522 not printing and the orange light and green light are flashing 10 times alternating.
PIXMA TS3722 only will take 5x7 paper and will stop taking half way of a 8.5x11
When I first got the printer it was printing regular size paper just fine. I was needing to print a lot of wedding invites and envelopes so I was needing the paper size 5x7. So I changed the settings to print on that size. I am now needing to print o...
G3200 Page partially printing
I have a Canon G3200 Megatank. I have had it a year or so. Lately it has started printing only part of the page and then ejecting the paper. I have cleaned the nozzles and performed a deep clean as well. I have tried printing through the port ins...
PIXMA G7020 printing extremely light colors
Have a G7020 and it's printing in color, but the colors are very light. I've done two cleans and an ink flush and it still just prints as if the colors are very light; there is no color detail (the photo is fine quality; plenty of pixels) and it loo...
PIXMA TS3722 Paper Roller Messed Up
A pen fell into the paper tray and messed up one side of the paper roller so now nothing can print. Is there a way to replace it or fix it?
Resolved! PIXMA G6020 not printing black or colors properly even after clean, deep clean, and ink flush
For a long time my printer could not print black and could only print things if it was in color, even after I did the cleaning and deep cleaning. I finally took the printheads out to try to manually clear them of any clogs with isopropyl alcohol. I r...
ip7250 printing light grey instead of black
Hi peeps, I am wondering what I am doing wrong. I am pretty new to printers so please go easy if it's something simple lolBasically I have ran the nozzle checks and the colours seem fine. Blacks are all working how they should be ectBut when I am pri...
Resolved! Code 5,157,69 - MG5520
I have a PIXMA MG5520 printer. The printer works, the copier works, but when I try to scan, I get a Code 5,157,69. I have uninstalled and reinstalled the software, but nothing seems to work. So my guess is that there is a setting which somehow got...
PIXMA TR8620a - doesn't recognize new cartridges
I have had this printer for a little over 2 years. It now does not recognize any new ink cartridge when I insert it. I bought the same ones from Amazon I have previously purchased. It was a complete set, so I tried every color and the printer did ...
Resolved! PIXMA TS702a Error code 1850
I am attempting to print onto a printable disc. I have followed all instructions but keep getting error code 1850. I pushed the output tray in and inserted the disc tray pressed OK and then getting the error and telling me to do everything I already...
