Camcorders
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Convert data on micro cassettes

I have a ZR20 with movies on a few dozen micro cassettes.  Is there a way to transfer the movies from the cassettes to an iMAC?  Thanks for any help.

ddddan99 by Contributor
  • 1030 Views
  • 7 replies
  • 0 likes

It's NOT phantom power! It's BIAS power!

People keep using the term "phantom power" incorrectly when referring to a microphone with an external battery or needing low power from the source. The correct terms for just about anything using a 1/8" (3.5mm) jack (TRS or TRRS) are "BIAS POWER" or...

616SYw5nBIL._AC_SL1500_[1].jpg

VIXIA HF M30 - External Video Capture?

I know the camcorder doesn't have the built-in ability to stream video but I'm wondering if it's possible to buy an external video capture device to capture & stream live video. Anyone? Thanks!

thumdar by Apprentice
  • 1025 Views
  • 2 replies
  • 0 likes

XA50 USB to Mac (High Sierra) for clip transfer

Hello,Has anyone successfully USB connected the XA50 to a Mac and import into FCPX?I connected the camera and momentarily it was visible in FCPX's import dialog but then quickly disappears. Perhaps it's because of my old OSX? I have a straight USB ca...

sunra by Contributor
  • 1227 Views
  • 5 replies
  • 0 likes

Canon Vixia RF800

Hi there, I have a Blue Yeti Microphone here, however, would it be possible to connect that mic up to the Vixia 800? And, if I am able to, how would I go about doing that? Links to cords that I would need to connect the mic up to the Vixia 800, would...

focussing ring on vixia hf g50

Just bought my new Vixia HF G50 and am finding the focussing ring takes a lot of turns to make even the smallest difference in focussing. I've got it set on manual with the toggle switch on Focus instead of Zoom. According to the manual it should jus...

Focus ring doesn't work

The  focus ring on  my Vixia HF G50 is very stiff and has no effect on  the image  no  matter  how  many turns  I give it.  I've got the button on the back of the camera set to  Focus, and have reset  all preferences to factory settings.  I've clicke...

Resolved! ZR70MC - How to get video off of MiniDV Cassette?

Hey all, About 15 years ago, I somehow connected my camcorder to my Win 7 computer and was able to get the video off of the cassette.  I don't remember if I used the USB cable that comes with the camcorder or not.  I vaguely remember pushing the Play...

Vixia HF R800 As A Webcam (I have everything)

Hello,I have a Vixia HF R800 camcorder. I was told elsewhere that by using an HDMI to USB converter I would be able to use it as a webcam. I have everything I need, but when I go to use it, nothing comes up. I don't know if there is a camera setting ...

Vixia HF R800 Zoom Remote

Is there a zoom/focus remote out there that is compatible with a Vixia HF R800? Something similar to a VariZoom switch/remote?  -Thanks

ZSUNTKEN by Contributor
  • 2783 Views
  • 1 replies
  • 0 likes

Resolved! Canon XA50 ferrite core

Hi, I've snapped it together before connecitng it to the power cored. How do I re-open it...?!

sunra by Contributor
  • 677 Views
  • 2 replies
  • 0 likes

G50 Buzzing noise when starting up

i have a newer g50 " used 10x's  . it just started making a buzzing noise when i turn it on. it's a mechanical noise like you would hear if you had an old wore out computer fan or a nosiey servo buzz. sometimes it's quick and other times it goes for ...

rcflyer by Contributor
  • 756 Views
  • 3 replies
  • 0 likes

Vixia HF R800 HDMI Out Is Dark

Hi, everyone.I'm using the Vixia HF R800 to broadcast our church meetings.I purchased this in August of this year.The HDMI output to my capture card and television is dark when compared to my Panasonic camcorder.When hooking the Vixia camcorder via t...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.