02-01-2025
11:09 AM
- last edited on
02-01-2025
11:36 AM
by
Danny
I am attempting to display 1920 x 1080 video output from the camcorder to an HDMI input on a TV via a 10-foot cable. The still photos display well this way but the videos do not display on the TV. Output Onscreen Displays is set to On. Is there some setting I am missing?
02-03-2025 06:27 PM
Hello jtur285atgmail,
Let's check to see what the [Output Status] is reading on the camcorder. You can find that in the [Display Setup] menu where you find the {[HDMI Max Resolution] and [HDMI Scan Mode] settings. You may want to also check that [HDMI Max Resolution] setting. I would also ask trying a different TV or monitor and cable to further troubleshoot the issue.
02-04-2025 09:56 AM
John, I have attempted these possible solutions with a different TV and have the same result. When the camera outputs photos to the TV, the Output Status provides video and audio stats and the TV displays as expected. With the clip output to the TV, the Output Status is blank for both video and audio and the camera display is normal, but the TV has no display. For some reason the camera cuts the video output.
02-04-2025 05:29 PM
Hello jtur285atgmail,
Thank you for the additional information. I'm sorry to hear that the issue persists. Were you able to try a different HDMI cable as well? If this is the case, the camera may need to be evaluated at a service center unfortunately.
Please follow the link below to access our online repair portal to arrange for service:
https://mycanon.usa.canon.com/signin
If you already have a My Canon Account and your product is already registered, simply click on the “Get Repair Services” link on the left menu and follow the onscreen instructions to arrange for service for your product.
If you have a My Canon Account and your product is not registered, you must register your product first. Click on the “Get Repair Services” link on the left menu, then click on the “Register Product” link on the right. After your product is registered, click on the “Get Repair Service” link on the left menu and follow the onscreen instructions to arrange for service for your product.
If you do not have a My Canon Account, you will need to create one. After you create your account, click on the “Add Product” link to register your first product. After your product is registered, click on the “Get Repair Service” link on the left menu and follow the onscreen instructions to arrange for service for your product.
Once you have completed the repair request, you will have an opportunity to print a copy of the request for your records. This request form will also contain shipping instructions and an address label that you will attach to the outside of your shipping box when mailing your equipment for repair.
When shipping your camera, please be sure to remove the memory card and batteries. You are not required to send any accessories or manuals when shipping the camera. Be sure to include your name, street address (no P.O. boxes, please), telephone number, email address, and a letter describing the issue with the product.
Alternately, you may fill out an online repair request form at the following link to setup your repair using our online service. Scroll down the page and look for [Request Forms & Service Programs].
https://www.usa.canon.com/internet/portal/us/home/support/service-repair
As we do not provide RMA numbers for service, we suggest using a trackable and insurable service (i.e. UPS, FedEX, Priority Mail) to ship your camera. Please package the camera very securely in a sturdy shipping box to prevent damage during shipment.
Please send your camera to one of the Factory Service Centers below:
Canon Factory Service Center
12022 Canon Boulevard
Newport News, VA 23606
Or:
Canon Factory Service Center
123 Paularino Ave.
Costa Mesa, CA 92626-3311
Upon arrival at the Factory Service Center, your camera will be logged in to our repair database and assigned a repair number. Next, the camera will be visually inspected, and you will be advised of the findings. If the required repairs are covered by the warranty, the repairs will begin immediately, and you will not be contacted. When the repairs are complete, the camera will be shipped back to you via Federal Express. The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed. Usually, warranted repairs are completed within approximately five to seven business days of the camera's arrival at the Factory Service Center.
All decisions regarding warranty coverage are made by the Factory Service Center at the time of repair. If the repair entails something that is not covered in warranty, a written estimate will be sent to you at the address that you have provided. The repairs to your camera will not begin until you approve this estimate and make payment arrangements. If, after receiving the estimate, you do not wish to have the camera repaired, please inform the Factory Service Center of your decision as soon as possible. If you decline the estimate, the camera will be shipped back to you unrepaired.
Please note that our U.S. Factory Service Centers are unable to accept packages from or return equipment to addresses outside the United States.
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.