Printable Burlap Paper settings - Pro 100
I just got some Burlap printable paper and was wondering if anyone has settings to recommend for the Canon Pro 100.Thanks!
Posts
Resolved! What is going on with these prints? (Prograf-1000)
Am I running out of ink? I just bought this printer and all I've printed was maybe 15 4x6 - at most !It's telling me these cartridges are already at 30% and 20% respectively!Can somebody help me understand what's going on please?
Fine black line on print, Pro 1000
Hello AllI'm getting a fine black line across my 8.5 by 11 prints about 1 1/2 inches from the bottom in portrait mode (left side in panoramic) with my Canon Pro 1000. The line is in the same place for every print and appears to be printed intentional...
Pima Pro 100 not detected anymore - MacOs
I've tried everything I know of or that I found in the FAQ to no avail. My Pro 100 is connected to the iMac by USB cable, and to the router by ethernet cable. I've tried with a Macbook, I've tried by wifi after downloading the most recent drivers and...
Canon Pro-200 - Edge to Edge printing problem
I've been printing edge to edge 8x10 photos without an issue for the past few weeks, but over the past few days, the printer hasn't been printing on the bottom left of the paper. We're talking maybe a millimeter. However it prints to the edge on the ...
Resolved! Pixma Pro-200 replacement printheads
Where can I buy a replacement printhead for my Pixma Pro-200 printer?Thank you.
PIXMA PRO-200 Replace print head with micro piezo print head?
Is it possible to change out the printhead in a Canon Pixma Pro-200 with a micro piezo printhead?Thank you!
Loose pieces in Printer (Pro 300)
I received a Pro 300 today in the mail, used from eBay, and when I turned it on, I got Error Code 5100. I was supposed to check if there are any foreign objects in the printer, and I found two white plastic parts. I think they may have come loose dur...
PIXMA PRO-200 Blacklight poster printing with Epson ink
I have a Pixma Pro-200 and I want to print UV responsive posters, but I can't seem to find any Canon UV ink. So far I've found refillable cartridges and Epson UV inkSo, if I put the Epson ink in one of these cartridges and swap the chip like you're s...
imagePROGRAF PRO-300 Canon ICC profiles missing
I have a Pro 300 used on a Mac. I updated to Ventura 13.4 this week. All of Canon ICC profiles are missing when I try to print on Canon paper. I reinstalled the IJ Mac driver, restarted and the profiles are still not there. Any suggestions on how to ...
Pixma Pro 200 - Prints Not Accurate
Hi Alli was so excited to get this printer but I have not had much success. I have tried printing cards that are 5.25” wide and 8.5” long. I can’t get it to print correctly. And also all my colors are coming out dull. My old cheap printer the colo...
TC-20 Missing Printing Preferences.
I've had this plotter installed on this same computer but had to reformat and reinstall windows. I downloaded the main/master file for this plotter and it runs through the setup like before; but when it's done there is not icon for it under devices ...
Adobe RGB profile not showing - Pixma Pro 100
Hi,I'm running Win 11.According to the user manual, within the printer properties, under "main", under Color/Intensity->Manual->Set, under the "Matching" tab: I'm supposed to have the option to choose "ICM" and then choose between "Standard" and "Ado...
Pro-100 Problems Grow - Driver and Installation Issues
I continue to struggle to get my Pro 100 printing acceptably. But now I have managed to make it completely inoperable. My PC is a Lenovo running Win10/64 bit. Here is what has happened. I deleted the printer on the printer and scanner page by clickin...
PIXMA PRO-200 software installation won't let me change destination folder
When installing the driver for Canon Pixma Pro 200 printer, I am unable to change the location into which the driver is installed. A page of instructions stating "This will take 54.1 MB of space on your computer." contains a button with "Change Insta...
