Production Printing
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

imagePROGRAF iPF700: Colors fade during printing

Hello. I have an imagegraf ipf 700.  I have  run the head cleaning many times trying to solve. All colors will usually print fine after cleaning and maybe for one image afterwards, but then prints will be very dull u till I run the cleaner  again. I ...

gwoj by Contributor
  • 690 Views
  • 0 replies
  • 0 likes

Plotter-Printer Recommendations

PLEASE HELP - Our Graphics Designers are interested in a NEW plotter-printer.They are currently using an old EPSON SureColor P7000, which needs replacement.Would your Canon ImagePROGRAF Pro-2600, be a suitable replacement? We almost exclusively use C...

Billy1 by Apprentice
  • 832 Views
  • 1 replies
  • 0 likes

imagePROGRAF TC-20 Error B50A

Good morning! I recently bought an imagePROGRAF Tc-20 printer, and after the first ink load, it says error B50A. I have turned off the printer, unplugged off the power outlet, and donde everything the manual tells. But still I have the error. What ca...

Sisely by Apprentice
  • 780 Views
  • 0 replies
  • 0 likes

ARM driver for imageRUNNER ADVANCE DX C3930i ?

Hi,is there any Windows driver for the imageRUNNER ADVANCE DX C3930i on ARM based CPUs?I have not found anything online. Maybe Canon should implement those drivers, because ARM based CPUs have a rising market share?!Thank you very much for reading. I...

Bilosch by Apprentice
  • 1088 Views
  • 1 replies
  • 0 likes

Canon imagePROGRAF PRO-6000 stop printing

Hello,I've a Canon Pro 6000, recently, while printing on a 60" canvas, it suddenly stop and told me that I've run out of paper, even I've enough canvas left in the roll.Anyone can help please. Thanks eve 

Screenshot 2024-12-08 at 23.00.56.png

imagePROGRAF TA-30 - EC31-2F1C Error

Our imagePROGRAF TA-30 from a few years ago has started sporadically displaying an "EC31-2F1C" hardware error.  I've done some basic troubleshooting to rule out obstructions or other obvious causes, and powering it off/running the various cleaning pr...

imagePROGRAF TA-30 Registration

Hi,I'm trying to register an imagePROGRAF TA-30 that was purchased a number of years ago.  However, I keep receiving an "invalid serial number" message when doing so, indicating it was either mistyped or a non-US serial number.  (It was purchased fro...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements