Resolved! imageCLASS MF642CDW paper-out light on when machine has paper
My Canon imageclass printer (MF642CDW) says it is out of paper, meaning that the orange light blinks; however, it is full of paper. What could be wrong?
Posts
imageCLASS MF654Cdw not printing full black
I just picked up my new Imageclass mf654cdw And the first few test pages were fine. I'm trying to print front and back pages on cougar digital paper. One side comes out acceptable but when printing the other side the blacks are super splotchy. I tri...
imageCLASS MF462dw Firmware update causes document feed failure, left side cut off in scans
I use VueScan software. Until recently, it worked perfectly with the document feeder on a MF462dw device. A few days ago, the MF462dw received a firmware update. Now scans that use the document feeder are unusable because the image is skewed left. Us...
GX6021 Factory Reset and Maintenance Cartridge
Will a factory reset on the #GX6021 clear the maintenance cartridge history so that a refurbished cartridge (by me) can be used? If so, is there a hard reset procedure available for this printer?
Color imageCLASS MF654Cdw toner shade issue
Hi, I purchased a Color ImageCLASS MF654cdw, from Best Buy and it was great until the printer started printing with blurry lines and also started jamming constantly. I double checked with my manufacturer and with canon about my vinyl being...
MAXIFY GX4020 Constantly Offline
My GX 4020 constantly goes offline and I'm not able to print from any device. It it wireless, has a static IP address, and I changed the power settings so it is always on, but 90% of the time when I try to print it is "offline". When it is "offline...
Resolved! Print Jobs Stuck in Queue on LBP674Cdw
I'm having ongoing issues with my Canon Color imageCLASS LBP674Cdw. Print jobs show up in the queue but stay stuck in a “Waiting” state and never print. The only indication of any issues in the printer menus is that the color toner cartridges (which ...
ImageCLASS MF654Cdw scanner bar disconnected from belt
The scanner bar has become disconnected from the belt on my printer. Because of this, the printer immediately goes into error mode upon startup and can't be used. The belt moves as expected upon startup. The printer is only 2 weeks old so this is def...
Scanning film negatives with a MF654Cdw?
Is it possible to scan film negatives with a MF654Cdw? TIA
imageCLASS MF453dw - scans offset, white boarder at top & left side
I have replied to another article called "imageCLASS MF453dw White Border on Scanned Image" but, due to its age, am not expecting a reply. I now start a new post here explaining the issue.There is a white border at the TOP and LEFT sides of the scan...
MF455DW Stopped printing fax TX reports
Help!All of a sudden, my MF455DW has stopped printing fax transmission reports. When I go to the "copy/print job" list, the report sits there "waiting". There is no way to release or print the report - the only choice is to "cancel". I have checke...
imageCLASS MF471Cdw How to stop automatic cleaning job
A neighbor gave me this printer. How do I stop An automatic cartridge cleaning job? The cartridges are non-canon and when I try to update the firmware, it says a job is preventing It from doing that. I think if I canceled the claiming job, I will be ...
imageCLASS MF753Cdw system manager and PIN unknown
No one knows the System manager ID and PIN in our office. I tried the default 7654321 and it does NOT WORK! I tried calling support and it says no one is in call back tomorrow! Any ideas?
imageCLASS D1550 Printer working but scanner does not
Canon D1500 Printer/Scanner: Connected Via USB to computer, printer works fine, but scanner is not working. BIOS is updated as well as docking station. I run the driver updates ([Windows 64bit] imageCLASS D1550/D1520 MFDrivers (UFR II / FAX / ScanGea...
imageCLASS MF726Cdw scanning blank pages
Hello all, I have just updated firmware on my MF726Cdw that was printing, scanning.. without a glitch for years. Now after new firmware and updated drivers, the scanner (feeder and flatbed) is producing blank pages only. Thus far I was running the un...
