Hi all,I pulled out the paper cassette on my Canon MAXIFY GX7050 to clean it and a small copper extension spring fell out (see attached photos).The printer still works but I would like to know to which part of the printer this spring belongs to, so t...
Hello,I have a brand new GX2020 that is printing all funky like. The print head and alignments are all correct. Every test passes successfully. trying to print on glossy paper and selecting that on the printer and the print settings. Firmware is up t...
I have a new GX2020 and have only printed about 10 pages in black. I look at the ink level in the front and it appears like it's 3/4 full. I've not altered the settings from the factory. Should i leave it in Auto Off, because after 240 minutes the pr...
I have the image class 753cdw for only 7 months. My experience with Canon genuine cartridges is that they DO NOT come anywhere close to their published page count claims. My experience: - Black Starter cartridge - 1100 pages, Black High Yield Cartr...
Recently purchased a Canon LBP674C printer, and while it has been performing satisfactorily thus far, I encountered a low toner warning. Upon reviewing the printer’s usage, I discovered that after printing approximately 400 pages, primarily consist...
Hi,Blue ink is full, and not printing. I have done a deep clean, and it shows faintly a few thin lines at the bottom of the print page. The ink is from Canon, and came with the printer. What do I do next?Thanks
We have an MF746cdw with a new set of toner cartridges. Already, Cyan and Yellow are reporting 90% remaining after 2 days of light use of the printer. There is a high pitch whining noise coming from the printer after it warms up (have video) and it w...
I have been trying for hours to get my I-sensys MF655cdw printer to print envelopes. I put the envelope into the Multipurpose user tray with the short edge first (the only way!!!) and with the address face up. I have tried various printing options b...
Hello friends and neighbors! My machine is a Dell acquisition; but my account manager there got promoted after my purchase. So, I did not want to deal with a new staff. However, I have both Windows 11 and Mac Monterey. While the Windows 11 instal...
Hello everyone, Printer: I got this printer from someone that wanted to get rid of it because they couldn't figure out how to get the color to print out correctly. When I try to do a full or partial calibration it says that there is an error and won'...
For the past several months, I have tried setting up my MF644CDW to scan to email. I've followed the instructions to the best of my ability, and read a number of posts on here... and yet, I'm still stuck. Turning to this forum in the hopes someone ha...
Hello,I’m reaching out for guidance on a new MF753CDW.I’m hesitant to post since I’ve seen similar reports without clear resolution, but I’m hoping someone can help.Here is what I am experiencing:Brand new MF753CDW IIStatic IP configuredConnected via...
Canon i-SENSYS LBP710Cx how to reset password management mode if i forgot
can't see two sided print in canon i-sensys MF3010, even i was able to see , i dont know what option should i change so i can print the 2-sided manually.
