Print Quality
Hello,I have a Image CLASS MFb42Cdw, the print quality is poor. It was printing just fine, don't know what the issue could be. Any help at all is appreciated. Haven't used it long enough to have issues.
Hello,I have a Image CLASS MFb42Cdw, the print quality is poor. It was printing just fine, don't know what the issue could be. Any help at all is appreciated. Haven't used it long enough to have issues.
Print density is much lighter along one edge than it is on the rest of an 8-1/2" x 11" page. I tried rocking the toner cartridge, as recommended, to no avail. Replacing the toner cartridge hasn’t solved the problem either. What should I try next?
I run a network attached Canon MF726cdw in my home-office and don't do a lot of 2-sided scanning but a few months ago the unit would jam while trying to pull the second side of the paper through. On the pull-back, it seems to cause the paper to pull...
I have a 2-year-old LBP622Cdw that won't recognize that has started giving me an "out of paper" error even though there is paper in both trays. I recently upgraded to Windows 11, but it started doing this before I upgraded from Windows 10. The same t...
Hello, My problem began when I went to print something after not using the printer for a few months. This is pertaining to the Canon LP6030/640/6018L ImageCLASS printer I did a fair amount of troubleshooting before joining the forums in search of he...
Last evening we experienced a brief power outage of less than two minutes. Today when I sent a document to be printed nothing happened. My computer is running Wondows 10, 64-bit. For some reason the network status showed 198.168.1.2 while the port...
No matter if I print or copy, there is about a 1 1/2" margin that doesn't print on both sides of a letter sized piece of paper. NOTE: I am not talking printing on the back, just on the top of the page. It prints right down the middle fine, but cho...
Hi folks. I reset my MF645Cx trying to get it onto our network. (That’s a long story for antoher day.)Now the printer will not print without a sheet of paper present in the MP tray.How to configure the printer to pull from Tray 1 first? (Or is this a...
I am trying to print a photo and cannot even find an option to print borderless. Does the MF642 print borderless and if yes, how? TIA!
keep getting a error support code 5011 need help
I've only got about 6 hours into this nightmare. My scanner quit working after my beloved ISP had a hicup.I have my MF4890DW set up on Ethernet and it prints just fine, but it will not scan. I've reloaded all the programs and updates including the pa...
Hello:Brand new to the forum - just installed printer this afternoon. From my computer, all is fine - prints beautifully. From my wife's computer, all appears well - drivers downloaded, can hit "print" button, and diagalog box shows printer working. ...
All the time, it gives me many print outs unless I stop it manually. In addition, it does not print out properly. Right end is always missing. I really want to have helps for these issues.
I've used the color printing option before and had no issue, other than the ink smudging a little on dark tones. But I haven't printed color in about 2 months and now it will only print in shades of gray, black and white. The cartridges are still mos...
I have been trying to get my printer to scan to my email with no luck. My email is a gmail so I am not sure I am settign the remote UI up correctly. A few discussions I have found was to set the port, but there is no entry for port allocation. i was...
Subject | Author | Posted |
---|---|---|
04-16-2025 04:29 PM | ||
04-16-2025 04:20 PM | ||
04-16-2025 04:00 PM | ||
04-16-2025 03:33 PM | ||
04-15-2025 06:41 PM |
New to the community? Here's some information to help you get acquainted:
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.