Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Pixma TR4520 printing errors

Issues with printing test page or files from PC..  Removed from Control Panel/Devices and Printers. Reinstalled.Rebooted printer-powered off printer w/ 30 sec wait.Still getting error 1003 and 01Still not printing test page.  

kghrph52 by Apprentice
  • 144 Views
  • 1 replies
  • 0 likes

Resolved! Is there an ICC profile for TS5320?

If so, where would I find it? I'm sending images from Photoshop, and the TS5320 is printing out darker images. No, my monitor is not calibrated. I'm currently using sRGB. I went on the Canon site and found ICC profiles for the Pro line.

ink refills for MX492

I have a MX492 desktop printer and accidentally bought the wrong packages of ink refills.  I should have purchased 245xl, but instead  brought home 210xl.  I thought the list on the package included my printer, but realized when I went to use one tha...

MX350 Support on Windows 11

I just bought a new laptop preinstalled with Windows 11. I can't find any W11 drivers on Canon's download site. When I use one of the utilities, it seems happy detecting it as W10 but then when it errors out when trying to install the drivers.In this...

DS256 by Apprentice
  • 134 Views
  • 2 replies
  • 0 likes

PIXMA TS3322 Error P10

I am getting P 1 0 error on printer. I have turned it off and back on. After I have turned off and back on, I opened the printer and the cartridges are not visible

Pixma MG5320 B200 error

I've tried everything I could find online to resolve the B200 error on my Pixma MG5320. I've cleaned the print head.  I've removed all of the ink tanks. I've repositioned the print head in the center before powering on and then closing the lid when t...

TR8620a prints half lines

Got everything set up fine but when it prints it is half letters. Not every line but most and causes the document to be unreadable. I have cleaned the nozzle so many times now its telling me ITS CLEAN! I have also aligned it again. Not sure what to d...

ix6820 magenta out of control

If a photo has no red, or all the red in one place, it prints fine.  If there is red-dish throughout, there's way too much magenta in the entire print.  And a black and white print appears sepia.  I've done all the things to the printer I could but t...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.