mx922 installation was difficult. set up the pc - ok - can print and scan. set up the mac- had to fight with it- then 3 hours later just posp up. can print from mac, not from pc. reset printer - can print ffrom pc- not from mac. rest again- s...
I just installed a new cannon print head and the same error message is coming up even after replacing with a brand new print head and unplugging for more than 15 minutes... This seams to be a built-in defect with so many people having the same issue....
CanonMX920 error code 1007Has ben working well.Now suddenly won't print.Says "No paper in cassette (upper)", which is true but I don't want to print photos.There is regular paper in lower cassette.
The software and on-unit menu screen top out at 600 dpi, but this machine is supposed to be capable of much higher.Do I just need better software (and if so can you recommend something that would work) or is there just something I missed along the wa...
I have an mg5400 which I really like and has served me trouble free until recently. it now longer communicates wirelessly. it must be hard wired to accept a print command. says printer is offline even though it is up and running. takes right off ...
I cannot find the settign to default my iMAC to greyscale with my MX922. I'm using WAY too much ink. someone please help?!
My MX882, after sitting for a while, will always freeze up, so that when I go to print, it doesn't respond, and all the buttons are dead. To add insult to injury, after pulling the plug and restarting it (apparently my only options), after starting u...
My IP3500 worked fine for years until a few days ago. It will only print graphics but will not priot any text. What could be causing this?
I replaced ink and now can't get anything to print. It sounds like it works and show's full ink. I took one out nd shows error. Not sure what to do now.
Every time I try to print, my printer prints double character. I've been trying find the cause of the problem and I just can't find it. Is there any way to fix it?
How do I scan multiple documents to a single pdf from the ADF on my MX922?
Firmware upgrade will cause printer crashes. Printer randomly powers down. On power up given caution "Power was not turned off corectly the lat time. Press the (O) button when turning power off." Have discussed with 2nd level tech support at Canon...
I've gone through all the settings, but can't seem to find an option that allows me to keep scanning additional docs after I have scanned the first one. Can you help? Thanks.
The front door on my printer is jammed shut. I am unable therefore to do paperfeed, or print out. The hinge on one side seems to have become out of line. There is no obvious way to take the outer cover off, as I am sure that this will easily solve th...
my canon 5320 has ink but won't print on mac os 10.7.5
| Subject | Author | Posted |
|---|---|---|
| 11-27-2024 04:39 AM | ||
| 11-26-2024 05:13 PM | ||
| 11-26-2024 07:24 AM | ||
| 11-25-2024 08:13 PM | ||
| 11-25-2024 06:21 PM |
New to the community? Here's some information to help you get acquainted:
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
