Hello,Any XF605 users out there that might be helpful with a manual mic level issue I am having. It feel like there is a very small window on the audio level dial, where it either peaks out or is very low volumes. Is there an adjustment in the menu t...
Out of curiosity, I recently ran a test to see if my cameras could shoot well in low light -- as seen in Wolf Hall (BBC TV series, well worth watching). The results seemed pretty cool to me, so I thought I'd share:https://moonblink.info/MudLakeThe t...
I have a problem with the output signal via HDMI and the stored data only at C-log2 and C-log3.Prerequisites: All devices and programs are on the current firmware. If the LUT were measured, the WFM would look different!When I connect my smallHD to th...
I have an XA11 video camera. I recorded an event only to find out that there is no audio recorded. Can some one assist me on how I can retrieve the sound?
I have 3 questions on settings for the XA50.1. setting the user bit(page 76 of manual)2. selecting the audio format of MP4 clips(page 77 of manual)3. selecting drop frame or non drop frame(page 75 of manual).
Can you turn off the variable aperture on the Canon XC15? I’m using it for a series of group interviews and need to be able to zoom in on each speaker quickly without the aperture changing. If not is there a workaround? Thanks.
Hey all, am I right in presuming that I can HDMI out to an ATOMOS recorder? If so, is the HDMI from the XA20 "clean"? Also, will the camera record internally while performing HDMI out? Thank you in advance!
Hi everyone, On the Canon R5 video 'Picture Style Settings' there is an option called 'Clarity'I went through the settings on the R5C but couldn't locate any such, this setting makes the video stand out givesit a punchier look, I wanted to ask any...
Really happy with a couple of C100's I picked up recently, and the Data Import Utility (DIU) is superb. Does anyone happen to know how/where it tracks which clips have been already stitched/imported from an SD card? We are transferring footage ever...
I am trying to connect the above BM Video Assist via HDMI to my C300 Mk III, but no matter how I set either device's settings, the video assist keeps reporting, 'no signal'. I have changed HDMI cables but still no success. I have used the same video...
Hello all.I have a Canon XA50.On page 49 of the manual it lists the Focus Guide.I do not understand and seem to not be able to get the focus guide to work.Can you list the steps and explain how to get the Focus Guide to work and explain it in a way t...
#TeamCanon When I use the Tascam CA-XLR2d-C with the Canon R5 C, the choices on the camera's Audio Setup menu page to set record levels and to select auto or manual leveling are all dimmed. Although I understand that levels are to be set with the di...
HelloI've read about people damaging their camera's HDMI port when powering both the camera and monitor from a v-lock battery, via the D-tap ports. It seems to have something to do with both cam and accessory drawing power from the same source and th...
I'm trying relay recording on the R5C. I pre-formatted 2 SD cards and 2 CFe cards, and then ran a recording session where I started on SD, relayed to CFExpress, swapped out the SD while recording, relayed over to that, then swapped out the CFe, and ...
so added expansion pack. but cannot get browser remote setup to see camera. tried internet explorer and chrome and edge....... i can ping camera from computer with cmd prompt and it shows up when i pingit. but browser does not to anything. ive tried...
