Professional Video
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

C300 mkiii run/stop

Hey folks!Does C300 mkiii support run/stop capabilities? I want to use Nucleus-M on a gimbal to control recording, and the motor to LANC cable doesn't work. Am I missing something? Do I need to turn on anything in camera to allow R/S to work properly...

R5 C flaky connection with 15ft tethering cable

At this writing only Capture One supports tethered shooting with the Canon EOS R5 C. But the connection is intermittent when using a TetherTools 15-foot cable. The connection drops and re-establishes every few seconds.I've tried two different cables ...

sfogel2 by Enthusiast
  • 2826 Views
  • 3 replies
  • 0 likes

XA75 HDMI output resolution?

Why is it so hard to find out the max resolution from the HDMI output on these cameras? 3G SDI gives you all the information you need, but just stating HDMI as an output gives me nothing. There doesn't appear to be a technical specs section that cove...

jgoodwin by Apprentice
  • 1203 Views
  • 2 replies
  • 0 likes

C100 Mark II missing thumb rest

A rear lens cap for an M42 screw mount lens fits perfectly to cover the side grip unit mounting threads when the side grip is removed. Helpful to know if your thumb rest is missing or lost. Replacement lens caps are readily available online. Just sea...

A_Coley by Apprentice
  • 2718 Views
  • 2 replies
  • 2 likes

CR-N300 Firmware update 1.1.1 to 1.2.0

I am trying to update the firmware for two new CR-N300 PTZs and it keeps telling me the firmware is an older version than what is installed. I downloaded 1.2.0 and the PTZ has 1.1.1. I am running on a Mac using Safari. 

nhibble by Apprentice
  • 828 Views
  • 0 replies
  • 0 likes

Custom file naming on C300mkiii

Hello,Is there a way to create custom file names for clips in the C300mkiii similar to how you can on Sony FX9? For example I want my clips to be labelled as project_interview name_Roll number_date. Need to know how to do this for a shoot tomorrow.th...

Cannon C300 MKiii Chroma Key

Not sure if this is a dumb question or not.... but is there a way to connect and view what I'm keying as my background of my green screen while using the Cannon C300 MKiii? Do I need to set up an external monitor to view that or can I view it in my c...

Kaczmru by Apprentice
  • 871 Views
  • 1 replies
  • 0 likes

XL H1 Lens error

My XLH1 is giving me a lens error and is making a small motor sound. I think the shutter is attempting to close? Any ideas on how I can fix this? All I can find on the internet is to clean connectors and re connect the lens to the camera.... Thanks i...

Agape4u by Apprentice
  • 790 Views
  • 1 replies
  • 0 likes

Resolved! C70 - Event-triggered recording

Hi ...Would like to ask if it's possible to trigger recording for the C70 via an external event-triggered device (e.g. light or sound sensor device). If it's possible to can please share your experiences. Thanks!

Unanswered Topics
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements