Hi,I’m currently using Canon Professional Print & Layout (PPL) software, a Canon Pro-300 printer and A3+ Hahnemuhle Fine Art Baryta paper. In accordance with Hahnemuhle’s instructions, I’ve been using a “Media Type” of “Baryta Photo Paper” within PP...
Using the "roll" method, is it possible to print a 24" wide x 36" long banner? Also a 48" or 60" or 72" long banner?Does this printer automatically cut off a "roll" document to a specified length?Thank you,John
When trying to print from my brand new Pixma Pro-200, I repeatedly get message to load paper even though it is loaded. I've tried letter sized plain paper and 19 x 13 photo paper. The letter paper printed twice out of perhaps a half dozen tries. I've...
I have been in the photography business for 40 years starting out as a printer in both traditional black and white printing and C Type color printing. I started digital around 2016 onward and watched the technology evolve to the point where photograp...
My Pixma pro100 is 13 months old and suddenly will not power up. There are no unusual circumstances. Push the power button, & nothing!!! I've seen others that removed the power supply and re-installed as a fix, but that did nothing. Any other suggest...
I have a Pixma Pro-10. I am trying to print on Arch A paper size, 9 x 12, but borderless. Can anyone tell me how to add the Arch A paper to my set of paper sizes? Alternatively, is there anyway to set up the paper choice so I can get a borderless pri...
I have a Pro-10 that's been sitting for two years. I have replaced the print head and all ink cartridges. When I first tried printing, I was able to get a nozzle pattern. Now, after a couple of deep cleanings, no ink is printing at all. Any thoughts?...
My pro 1000 is printing a blue/cyan tint at the beginning of a print job. The blue/cyan tint is 0.25" to as much as 3" and extends the entire width of the print. After this the print is normal. Happens with black and white or color prints. Print head...
Hi, my pro 1000 has printing issues. I performed several cleans and a system clean. Phot 1 is after that. All the lines look fine, only the black blocks are smeared and there is a bright line in the CO field. So I performed another Deep Clean. Resul...
Ive just replaced all of my canon pixma pro-200 inks with genuine canon inks. They registered great but going to do my first print a week later they are all low or empty on the display apart from one. Not sure what to check now, can they leak? Or is ...
I am having an issue with my Pixma Pro-200 all of a sudden printing odd color tones rather than replicating what I see through the lens. Any suggestions? I've seen the comments on this thread about having to uninstall and reinstall a new driver. I'...
How does this printer's various black inks work on screen printing transparency film? I am interested in the densities I can get. I use the transparencies to make negatives for Cyanotype printing. And the density range I can get from Black down to cl...
hey. Had this printer for a while. one day it stopped working. The power and alarm buttons flash 3 times each alternating. power light, alarm light, power light, alarm light, power light, alarm light. I called Canon Service and they told me the cost ...
My Pixma Pro-200 has been a great workhorse for printing black and white drawings over the years. It is suddenly not centering the paper, consistently being about 1/8 inch to far to the left when exiting the printer. It makes the right and left bor...
The printer tells me I have two notices - one takes me to a QR code to scan and buy new ink. There does not seem to be anyway to bypass this - I already have new ink and anyway it is not totally out of ink yet. If I press the back button I just get i...
