05-22-2024 09:22 PM
I have a Pro-10 that's been sitting for two years. I have replaced the print head and all ink cartridges. When I first tried printing, I was able to get a nozzle pattern. Now, after a couple of deep cleanings, no ink is printing at all. Any thoughts?
Thanks!
Solved! Go to Solution.
05-23-2024 03:01 AM - edited 05-24-2024 12:10 AM
Hello,
If your Canon Pro-10 printer isn't printing ink after replacing the print head and cartridges, try running additional cleaning cycles and ensuring proper Vantage ADP installation of the print head and ink cartridges. Check for ink clogs and air bubbles in the ink lines, and verify printer settings and firmware updates. Restart the printer and if the issue persists, contact Canon support for further assistance.
05-23-2024 03:01 AM - edited 05-24-2024 12:10 AM
Hello,
If your Canon Pro-10 printer isn't printing ink after replacing the print head and cartridges, try running additional cleaning cycles and ensuring proper Vantage ADP installation of the print head and ink cartridges. Check for ink clogs and air bubbles in the ink lines, and verify printer settings and firmware updates. Restart the printer and if the issue persists, contact Canon support for further assistance.
06-19-2024 11:33 PM
Eventually, after many cleanings and manual cleaning of the print head, I got it to work!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.