cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma pro 100 will not power up

Cckep
Apprentice

My Pixma pro100 is 13 months old and suddenly will not power up. There are no unusual circumstances. Push the power button, & nothing!!! I've seen others that removed the power supply and re-installed as a fix, but that did nothing. Any other suggestions out there? The prints are absolutely beautiful, but to last only 13 months of light use is unacceptable. Please let me know if you have any suggestions, thanks!!

1 ACCEPTED SOLUTION

dfgalletta
Apprentice

I had this problem as well, and called the technical support line at the number above. The tech support person said to do the following sequence below, which worked! She said it had to do with a power surge. I do have this plugged into the same outlet box as a laser printer but don't have much option here at work. She said to do the following:

1. Unplug the printer.

2. Briefly but firmly press the power button 10 times in a row.

3. Press and hold the power button for 10 seconds.

4. Plug in the printer. At this point I heard a "snap"/"pop."

5. Press the power button. You should be ok.

 

UPDATE: I had the problem again, and a new rep said to press it 15-20 times while unplugged. Also, she said to wait an entire minute before plugging it in. That worked! She said it should be plugged directly into the wall, not into a power strip or extension cord. I'm not sure I'm going to be able to pull that one off in my 1983-built office!

View solution in original post

32 REPLIES 32

minhthanhho
Apprentice

have you had your printer powered up again ? Can you tell me what's wrong with it ? i have the same problem .Thanks

 

drspickard
Apprentice

I have the same issue.   I have removed the power supply and replace and it will not power up.  Did you ever get a resolution.

 

Hi drspickard,

 

It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.

Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thanks Patrick!  

 

Initial Call to Support (Sunday June 21, 2015)

 

I initially called Technical Support on a weekend (Sunday 6/21/2015) and the technician logged onto my PC remotely, dug into system logs, and told me the problem was with my PC. 

 

His diagnosis and matter-of-fact attitude was the issue was with my PC and that my only recourse was to replace the printer.  I kept telling him that the printer would not power on, even after changing the power cable with my other Canon printer, but he stuck to his diagnosis,  the issue was with my desktop.  I told him i had only used the printer occasionally printed about 30 13 x 9 prints but I had never had any issues.

 

Fast forward to this week (Thursday July 23, 2015)

 

I called during the M-F normal support hours, got a US based person who was the greatest and told me they would replace the printer even though it was out of warranty by about 3 months, it was still within the grace period.  She has restored my faith in Canon Support and I learned an extremely important and valuable lesson;  call during normal business hours and receive a US-based support person!

 

Thanks Canon and kudos to my USA based support person this week!

 

 

Hi drspickard!

 

Just so you're aware, printer support by phone is only Monday - Friday. Anytime you're talking with an actual Canon employee, we're right here in the USA. If you called a number other than 1-800-OK-CANON (800-652-2666), you might not have been speaking with our technical support team. There are a lot of companies who pretend to be us, but there is only one Canon USA, and we win awards for our 100% US-based service and support!

 

Click here for more information!

Thanks Stephen for the quick reply.

HI Patrick, please see my message at the end of page 3 of this thread. I have tried all the steps to reset with no luck. I was able to find a refurbished power supply and replaced the original with no success. Can you direct me to someone who can repair my printer? I'm willing to pay to have it fixed. When I try going through the phone system it refuses to connect me to a service tech. Is that because Canon doesn't support this model anymore?

Hi DSigman1,

 

Canon does support the PRO-100 via phone or chat.  To contact a Technical Support Representative, please use the link below:

https://mycanon.usa.canon.com

 

In regards to the issue that you are experiencing, Canon does not service the PIXMA lines of printers.  You may be able to find someone locally to fix your printer, but please note, it may cost more to repair than to replace.

 

You are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.

To help you get up and running quickly, we also offer free standard shipping (if the order is completed by 12:30PM ET). If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight. Let them know you have been working with technical support and the Canon Upgrade Program was offered.


 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I've tried to contact Canon service to find a repair facility and it leads to a dead end. I've had the same problem as everyone else here and haven't found a solution. The reset didn't work. A replacement power supply didn't work. Can you help me find someone who will repair it. Please.
Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!