Pixma Pro-100 Won’t recognize new ink cartridge
Pixma Pro-100 Won’t recognize new ink cartridge. I tried removing and reseating the print head. Still doesn’t work. Any other suggestion?
Pixma Pro-100 Won’t recognize new ink cartridge. I tried removing and reseating the print head. Still doesn’t work. Any other suggestion?
I have a new CANON Pro 1000 printer. I got the message one of my ink cartridges is low (photo black). Should I change it out now or continue to use the printer until it gives another message such as "Ink out and needs to be replaced". Will it stop mi...
Hello everyone. Thanks for being here. I'm unable to find any YouTube videos to resolve this problem: The error code indicates that the "ink waste bin is full" and therefore the unit needs servicing, but Cannon Service doesn't provide that for this p...
Over the last year, I have been getting these lines on the edges of some of my prints. They only happen to certain prints, so I'm not sure why this is. I use this professionally to do my prints for shows, so I'm not sure if it is due to use. I have t...
The operating panel menu does not show the custom paper type I am trying to use. For example, I cannot select Baryta paper from the menu. Any suggestions?
Hi,I've been enjoying my new Prograf Pro-300. I've been printing almost exclusively on matte paper for two weeks, using the Matte setting on the printer display, as well as the PRO-300 Photo Paper Pro Premium Matte A paper profile in Photoshop. Howev...
Hello,I am writing this evening in the hope that someone from the community will be able to answer me. I have a two year old pixma pro-200. Recently it has started to print horizontal lines on my prints. I would like to note that I am an illustrator ...
I'm at my wits end here--I purchased a second-hand Pro-100 and I didn't have issues until the last few months. A lot of my papers tend to have streaks of ink at the top, bottom, and sometimes right in the middle and all my prints have this purple ove...
I am using a Pro 300 printer. I have downloaded the ICC profiles for Canson Infinity papers (Platine and Baryta). The ICC profiles are visible in Lightroom Classic. What settings should I use on the actual printer menu when registering these papers a...
I am having a repeated issue in the last few weeks where I get error 140B, “printhead not installed” even though my printer has a working printhead installed. I have carefully pulled out and reinstalled the printhead to no avail. I have shut down the...
I am having an issue with a photograph Ive been trying to print, and I can't figure it out. The corner of the image comes out entirely blue. I have gone so far as to copy the sky in a different part of the image and paste it into the area that was pr...
Hello,I'm having a weird problem and not having much luck with trouble-shooting. I have two computers that connect to my Canon PRO-300 for printing. I made one successful print today, but cannot print any more - the file is sent to the queue and sits...
Hi All, Not sure if this is the right forum. I got the pro-1000 and I print at least 1 photo/day in order to prevent the printer from running cleaning cycles (to save ink). I am leaving for vacation and wonder if there is a way to send daily prints ...
Hi AllI'm new here, hope someone can help. One of the cartridge won't click back in after removing it.??
In the middle of preparing for an art show this next weekend and was trying to print some 36" long panoramics.About a 1/3rd of the way with the print, it quit. I had to remove the paper manually. Red River Baryta Fiber ruined. Retried. Same result...
Subject | Author | Posted |
---|---|---|
04-24-2024 07:41 AM | ||
04-17-2024 04:47 PM | ||
04-15-2024 05:25 AM | ||
04-14-2024 07:37 PM | ||
04-11-2024 01:54 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.