How to Get the Most from Canon’s Software Tools for its Professional Inkjet Photo Printers Getting a print to match what you see on screen isn’t magic - it’s a process. And a big part of that process happens in the software. Whether you’re using the...
My first several prints were to 4x6 and it worked fine. After blowing through the first round of ink and then replacing all of the ink, it won't print to 4x6. Spent some quality time with support and determined it prints fine with any other size of...
Recently, possibly since the firmware update to 2.010, the paper profiles for fineart smooth and baryta photopaper are missing from the display on the printer. I see them in the Media Tool, but not on the printer itself. Inorder to use the papers...
I have a prograf 1100. The password was changed from the factory default. The password is lost. How to I perform a factory reset? The procedures in the manual require the password. Unless I can reset the passsword the printer is useless.
HelloI am considering getting the Canon ImageProGraf PRO-1100. Is it compatible with MacOS v15.x.x or only with MacOS v14?Thanks in advance for any help
I have just spent the morning getting the runaround from Canon's part replacement order department trying to find a replacement for a small part that broke on my Canon imageprograf Pro-1000. I was bounced around from one rep to another and nobody kne...
For some reason that I can't seem to figure out, the very bottom of this image doesn't seem to want to finish printing. It's like the printer refused to make a final pass. I've confirmed correct paper types, ICC profiles, etc. Using PPL and Canson ...
Hey all, not quite sure where to start...I inherited a Pixma Pro-10 and plugged it in for the first time. The power and resume buttons are doing the alternating flash thing, but the number doesn't match up with any of the error codes I was finding on...
Just received my PRO-300 printer. Was going through the Set-up process and when I got to the test paper alignment/or ink cartridge (the step after installing all cartridges) it wanted me to put an A4 piece of paper in to print. All I had at the time ...
Hi, I'm desperate for help with this... I'm trying to print accurately to a pixma pro-100s out of Photoshop. I'm on Mac OSX Sequoia 15.5 and PShop 26.6.1. Canon driver V 16.90.1.0. The issue is that I want PShop to manage colour. To do this I need to...
On my Second imagePROGRAF PRO-1100 printer since December. (First one defective and replaced by Canon). First one printed one page and then stopped. Customer Support walked through wiht me and it wouldnt event print the LAN settings from printer m...
When I print 2 sided card stock from the rear tray, the front and back sides of the doc are usually misaligned vertically by approx 3/16" inch or more. Is there a cure for this?
My Canon Pro-100 has started to wrinkle the top left corner of a print when printing an 8-1/2 x 11. I've looked inside and can't see much of anything when trying to view the paper path. I've adjusted the paper feed width setting to a little looser, b...
Hello! Any help would be greatly appreciated!Cheers, By the end of April, I had completed the proofing process and was ready for production on a 5 x 7 greeting card. The final proofed master file was printed with these settings:7 x 10 60lb Pecos Riv...
On the "Canon Support for PIXMA PRO-200" page, under "Software & Drivers",https://www.usa.canon.com/support/p/pixma-pro-200?srsltid=AfmBOoq6uDYzvVI_rBvSLmUt0Xn9Ev1R00E7PrSYIvlUZ0y9TCrE8PXwthe links, More Download InfoInstallation Instructions when cl...
I have a pro-1000, and trimmed my own 16x24 sheets from a roll (I need that specific size, and they aren't sold elsewhere. I'm ok with the labor). I've measured multiple times to make sure the sheets are near perfect dimensions. Because the sheets ca...
