Production Printing
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Cannon Pro 4000 One color on printhead keeps clogging

I have a Cannon Pro 4000 that the cyan on the nozzle checks continues to have missing sections, the grey occasionally has spots missing but comes back after a cleaning. The cyan will look good after a cleaning but when I print there is banding and th...

JWatLCSC by Apprentice
  • 922 Views
  • 1 replies
  • 0 likes

Canon PRO-4000 Maintenance Cartridge

 I have a question regarding ink tank installation.I changed out the maintenance cartridge two weeks ago, then started up the printer. The printer then informed me that all the ink tanks needed to be replaced. I then ordered a complete new set and in...

jesbert by Apprentice
  • 876 Views
  • 1 replies
  • 0 likes

Canon prograf 4000 color calibration

I recently had to replace the head. The printer was running fine, although I could see by comparing old and new tests that the color was a little off. I couldn't run a color calibration for a few days until I replaced a low CO cartridge. When I final...

Jfrank1 by Apprentice
  • 1036 Views
  • 1 replies
  • 0 likes

Ipf 6100

I can't seem to find replacement ink cartridges.  Have they been discontinued, is it a supply chain issue? Thank you. Garyboy

Garyboy by Apprentice
  • 860 Views
  • 1 replies
  • 0 likes

imageRunner C5860 adding scanner emails

Hello,I am trying to get our directory into the printer and to get it to display on the main screen when folks are using  scan to email. However the personal list is limited and even though I added everyone to Address list 1 this is not seemingly pos...

th4ddeus by Apprentice
  • 887 Views
  • 1 replies
  • 0 likes

Remove ULM and uniFLOW from an ir 5540i?

We recently acquired a gently used ImageRunner C5540i.  I have tried to get to the normal sms web interface (http:<MFP IP>:8443/sms) but the Universal Login Manager is coming up.  How can I remove the ULM from this machine without knowing the ULM log...

adotrats by Apprentice
  • 3004 Views
  • 1 replies
  • 0 likes

Mistake Moving a Prograf Pro 2000

Hi,I just moved my Prograf Pro-2000 and installed the ink cartridges BEFORE I turned on the printer. You could hear the ink fill the reservoirs but the menu said to NOT install the ink yet. What should I do? Anyone have experience with this mistake? ...

Windows Server 2012r2 print server

I am troubleshooting an issue with Canon copiers not printing PDFs or Images from a 2012r2 print server. I have yet to figure out why they are unable to print these certain documents/images. Any advice?

IPF9400

Printer won't take 13x19 sheet paper, I never even get to the pc to send the file

jon4 by Apprentice
  • 792 Views
  • 1 replies
  • 0 likes

IPF9400 Hardware Error

I have the iPF9400 printer and it is displaying Hardware Error 03800500-2F41. Is this a printhead issue?The two print I have installed show 3,000+ days each and 26,000+ Mdot.Do I need to replace one or both of the print heads?

Printer requesting department number

HelloWe have a copier / scanner / Printer that requires the user to put in a dept. code in order to print.  The problem is, there is a check box to "remember" the code.  We would like to "grey" that out so they must enter the code each time.  Can any...

rsc357 by Apprentice
  • 884 Views
  • 1 replies
  • 0 likes

IR Advance 9270

I am having trouble printing to this unit. I have Big Sur installed, the latest Universal driver and the driver seems to have installed correctly. Once the printer is added and a test print is sent or any print for that matter, I receive a "Printer i...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements