Production Printing
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

imagePROGRAF TM-300 not detecting paper roll

I am at a loss with this new printer (Canon imagePROGRAF TM-300). It keeps giving me the message that it cannot detect the roll of paper that I am loading in the printer. I have reloaded and checked everything multiple times. I am sure it is a user e...

imagePROGRAF PRO-4100 Moving process taking too long

Good day everyone I started the process to prepare to move my printer outdoors to another location but the process seems to take a very long time, So far more than 3,5 hours. Is that possible? I just wanted to get a feel for how much time it needs or...

Maggie69 by Apprentice
  • 2177 Views
  • 2 replies
  • 0 likes

Resolved! imageRUNNER ADVANCE C3330i Defective Printout

Model: Canon IR Adv C3330iDefect: Full of black printout.Explanation: Initially Error Code E21-0420 came, replaced Developing Assy. After restarted, E21-0420 error code solved. After that printer takes abnormal warmup time. After standby mode, tried ...

unnamed (1).jpg unnamed.jpg

Ipf6400 “replenishing ink” forever?

I have an IPF6400 I use for printing screen printing negatives onto transparencies. It doesn’t get much use, but the last time I used it was fine. I don’t do this full time, it’s like a hobby that makes minimal money. I booted it earlier in the week ...

Resolved! imageRUNNER 1730iF latest firmware

Can someone please let me know how to access the latest firmware for the imageRUNNER 1730iF latest firmware?Our non-profit organization was given this printer, and we are attempting to put it to good use for the club.  However, before implementing th...

netmgr by Apprentice
  • 6397 Views
  • 6 replies
  • 1 likes

Slow to no response from Canon IR 3725i Printer

After a recent power surge, my Canon IR 3725i Printer has become extremely slow and refuses to respond after a couple of prints. I am usually stuck with the "receiving" notification and then nothing is functional on my printer again. Cannot print, sc...

Resolved! Banding but only with Baryta - PROGRAF Pro-4100

New Pro 4100 owner here. Most prints are coming out fine but whenever I print with a Baryta the results are pretty bad. The papers in question are Moab Juniper Baryta Rag 305 and Hahnemuhle Fine Art Baryta Satin. The image below is my problem (the ve...

20231117_174338.jpg
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements