LUCIA PRO II ink compatibility with imagePROGRAF PRO-2000 & PRO-4000
https://www.usa.canon.com/newsroom/2024/20240125-pro-printers Will these be compatible with older PRO printers??
Posts
ImagePROGRAF 4000 leaving a black blob
Recently, my Pro 4000 printer has been leaving a black wet blob in the top right corner, which causes the print rollers to leave dots until it dries up. I suspect it might be the print head, but I replaced it only 18 months ago. However, I noticed th...
Custom paper profiles no longer working when printing from PS to Canon Pro-4000 (Mac Ventura, M1)
Perhaps it started when I recently upgraded to Ventura (i'm on 13.6.4). My custom profiles I've been using successfully for years, no longer produce accurate color (brownish cast) when printing from PS. Some folks suggest the profile is being applie...
Can't get images to print properly on Matte paper on imagePROGRAF Pro-4100
Hello Canon community, I'm facing an issue with my Canon Pro 4100 printer. When printing on satin or luster photographic paper, everything works smoothly. However, I've noticed that when I switch to matte-coated paper, the black ink doesn't print as ...
imagePROGRAF TM-200 Fine overlapping lines or gap lines on all my photo prints.
I have been having an issue with printing photos, mainly see it more on full print photos and not as much on certain photos (although they are still there but not as noticeable) Printer #TM-200Does anyone have any solution to this problem? My printe...
imageRUNNER ADVANCE DX C3830i only scans 4 times and stops
Hi,I'm having trouble with our cannon scanner. It's a big office type printer scanner. Not sure what it is. It is scanning 4 separate times then won't scan after that. It just keeps trying. I eventually get a "TX report" saying it was "unable to send...
imageRUNNER 1023iF Copier smearing
I have a Canon Image Runner 1023IF that smears the left side of the paper on each copy. I am attaching a pic of the problem. I have replaced a roller that I thought was toner soaked on that end. That was not the case. Canon 1023IF.jpgIt is a new drum...
Banding Issue imagePROGRAF PRO-4100
I have an imagePROGRAF PRO-4100. I'm trying to print photos on 17x22 silver rag paper, which I have successfully done in the past, but right now I'm having banding issues which are only affecting the large size. I've tried on 8.5x11 of the same type ...
Oce Colorwave 600 - Error Code 7506
I am trying to work on a Oce Colorwave 600 plotter that is giving me an 7506 error message. I have unplugged it for 5 mins, power it back up and then it gives me the 7506 error message.Suggestions on what it could be?
imageRUNNER ADVANCE DX C5870i Missing Admin Logout Button
Hello Canon Community!I have been working w/ Canons for almost 13 years now and am having an issue that I cannot seem to figure out so as a last resort, I am asking this forum.I have two C5870s among my fleet and for some reason, one of these machine...
ImageRUNNER ADVANCE DX C3826i won't accept coated paper
I need to use coated paper in our copier. When I load the paper in the multipurpose tray and change the paper type, the OK option is not lit and it will not accept the paper in the multipurpose tray. Any ideas?
Canon TM 200 Keeps saying 'head alignment has not been performed'
I have a brand new TM 200, I set it up a week ago and did the test print and a black and white document with text. I've switched it on today and saw it had a notice saying 'print head not aligned' so did the alignment as suggested, the notice won't g...
3325i - Missing printer function
All -We jsut moved offices and when we brought the printer to the new location, it had some issues connecting. After a few techs have looked at the machine, we've determined that the actual print function (ie the ability for the machine to work as a ...
Canon ipf780 completes print job but sends user “cannot acquire status” about the ink levels
An office I assist has a Canon IPF780 poster printer and it prints jobs but sends the user an error that is entitled “cannot acquire status”. The message that follows is about the ink levels and making sure the unit is plugged in, it’s on the network...
imagePROGRAF TM-350: Ink Differences?
What is the difference between ipf 320M ink and ipf 321M ink? I have a Canon TM-350 printer. It takes 5 ink cartridges to print. 4 out of the 5 cartridges are ipf 320 (C,Y,B, MB). The fifth being Magenta requires 321M. Why? When the inks are sold in ...
