Toner replenishment program cost?
I am trying to find out the cost of the toner replenishment program. Does anyone know what it costs?
Posts
Cannot install driver for imageCLASS LBP6030w
I had it installed then the printer went off line and I couldn't get it to work anymore. So, I removed the driver and started with a fresh installer from this website. When I try to run the Setup.exe in the BootUp folder (per instructions) I get an e...
MAXIFY MB2320 Black Ink Skipping Lines
the black in in my maxify mb2320 is skipping lines. this stated happening right after i was prompted to update the firm wear. i have done all the cleaning processes multiple times. even the manual cleaning with a cotton swap. still skipping lines. i ...
Maxify MB2120 Printing Trouble, Error Code 5105
Hello- I have a Canon Maxify MB2120 printer. When I send an item to print from my computer the printer recognizes it and starts processing. All it does it continue to processing-its moving inside but never prints. It will do this for 3-5 minutes. I w...
Canon Maxify 2720 dropping line
I have run the clean and deep clean several times on 2 different ink cartridges and still have this nozzle pattern. I have tried various alignments with the printer and still have this pattern when printing. Any suggestions or fixes for the problem ...
imageCLASS MF644Cdw Faded Printing Only From iOS Devices
Hello....imageCLASS MF644Cdw.....Printing from Windows PCs works fine. When printing from iPhone/iPads, the text is faded. I saw an older post that this is due to some Eco setting. However, I can't find where to make this change. Any advice is ap...
Canon MF4350D printer gives default error...newly installed on Windows 10 home
My HP laptop was hacked and I had to have the disk wiped and reinstall all applications. The Canon MF4350D will not install. I have tried to update the drivers but it still does not work. It is installed through port 2, not networked. I know this pri...
Resolved! Maxify MB2320 - is it cost-effective to repair? how?
My Maxify MB2320 doesn’t print black property. When I print a page of black (text or a block of all black), about 1/2” will print fine, then there’s a white gap of about 1/2”, then another 1/2” of printing, etc. This repeats for the entire page. When...
Printing from MF743cdw without Wifi connection
Please explain step-by-step how to print from an MF743cdw without wifi. My ethernet connection is fine, and I have a USB A-to-A cord, but the printer repeatedly gives an error message.
how do I permanently cancel double-sided printing? MF4150 MAC M1
Printer MF4150 is old, double sided printing jams the paper. now i have to change it from double sided to single sided each time i start printing. Often I forget change and the paper jams and it is hard to get it out. How do I change the settings s...
imageCLASS MF242dw jamming after each page...
I have an imageclassmf242dw I purchased ~14 months ago that has suddenly started jamming if I try to print more than one page. After each page, I get the error message that the printer is jammed ("Printer is jammed or no cart"). At that point, I can ...
imageCLASS MF743Cdw Constant Error 753 when scanning
Hello,I have an ImageClass MF743Cdw. When trying to scan to email it always reports Error 753. Below is what I have tried so far* I have read every post I can find on how to properly configure the scan to email function* I have reset the printer mu...
Why I printed from the Mobile, the colors were lighter than Desktop-Color imageCLASS MF656Cdw
Hi,I received my new Canon Color imageCLASS MF656Cdw printer yesterday. When I printed on the desktop, there had no problem. But when I printed from the mobile device, the colors were very light. I tried to print for many times, It had the same issue...
Printer Software for MAXIFY GX7021?
So I just bought a Maxify GX7021 and I'm a little lost within the downloads section for this product. I don't see any specific, like default main program/software. Is there no main software? I see downloads for photo printing but nothing for just bas...
imageCLASS MF8580Cdw Won't "Flip" Page for Duplex Scanning
I'm having an issue with the ADF not being able to "flip" the page for double sided scanning. Is this a roller or a guide issue?
