Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

IR3245i waste toner

Hi, does anybody know where the waste toner is located for a Imagerunner 3245i, and how to access it for changing/empting it?my copier says it's almost full but I have smears on my copies and I am waiting on contract to go through for services.any he...

engineer by Apprentice
  • 2613 Views
  • 0 replies
  • 0 likes

Canon image runner C5560i - 1 sided printing

Can anyone tell me why this copier cannot do 1-sided to 1-sided copying?  It can print from your computer 1-sided, but when making copies on the machine itself, there is no option to do this (only 1-sided to 2-sided, 2-sided to 2-sided and 2-sided to...

ct1830 by Apprentice
  • 2803 Views
  • 1 replies
  • 0 likes

Canon MF8580 and MF720 Not Feeding

Hi All,My Canon MF8580 started giving me problems last year and the technician here couldnt figure out what was wrong with it. I decided to leave it alone and buy another canon (Seeing that I had ink left) but a more updated version...the MF720. Now ...

Bluish puple streaks on right side of print outs

Hello, I have an MF8580Cdw and the last couple of weeks it has been printing a bluish/purple/pink streak on the right side of the paper. Do I need to change a drum or something or does it need to be serviced? Thanks,Cindy  

jasuser by Apprentice
  • 3643 Views
  • 1 replies
  • 0 likes

Canon MF4880dw Paper Repeatedly Jamming

My MF4880dw had been working perfectly until about 5 days ago. The paper started jamming at the exact same spot near a black roller and no matter what I tried (removing the roller and roughing it up a bit with sandpaper and changing the printer speci...

Paper Jam
elimoon8 by Apprentice
  • 4331 Views
  • 1 replies
  • 0 likes

MF227DW Scan Problems from scanner to computer

Hello, everything was working just fine until recently.  I usually scan from the MF227DW by: select scan type > computer > select destination > custom 1 > confirm destination.  Today I receive the following error on my computer: "MF Toolbow that is s...

dimal by Apprentice
  • 12149 Views
  • 2 replies
  • 0 likes

MF216n Error Notification: Toner Cover Open

After replacing the toner cartridge, the toner cover fully closes, depressing the tab below it, but the error light is blinking and the notification given on the display is that the toner cover is still open. The toner cover appears to be fully closi...

MFC624cw Scan to Email errors

I am not able to scan to email.Not sure if this is relevant but when I enter my email, after dot...there is a space before i can put com. Backspace only clears the dot. If there is some other obvious reason why I can't scan to email please let me kno...

imageclass mf6160dw paper jam after first page printed

I have the printer for a while. However, in the last few mounths whenever I print a multiple page document, the paper gets jammed in the back. I updated firmware but nothing works. I use regular paper and have to print one page at a time.  Any help w...

trupador by Apprentice
  • 2546 Views
  • 0 replies
  • 0 likes

Resolved! Laser printer has plastic sheet stuck

I have an LBP6030w Laser Printer and have been running overhead projector sheets in it with no problem.  Well, it decided to eat one of them.  The plastic sheet wrapped around the heat roller and I cannot get it out.  Any suggestions?

Dneill79 by Contributor
  • 5864 Views
  • 5 replies
  • 0 likes

ImageClass MF249dw - Margins on envelope off

I recently purchased an ImageClass MF249dw.  I use Windows 10 and Word 2007.  All efforts to use the printer to print envelopes has so far failed.  The envelope (size no. 10) prints with the return address .8" from the top and delivery address 2.8" f...

lisa298 by Apprentice
  • 3644 Views
  • 2 replies
  • 1 likes

MF 4570 copies and scans are very faded

I am wondering if there is a reason my MF4570 would be producing very faint copies and scans to a pdf.  copies are the worst and scan is very light.  This machine is a few years old and if no fix, i just need to know. ThanksTerry Sabers

Tsabers by Apprentice
  • 2519 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements