Office Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 


MF260: Portions of print jobs are compressed

I've noticed on the last few jobs, that i'm getting some portions of a print job compressed or expanded. Mostly compressed. It's not consistent and not all the time, but it does seem to happen on most of my big print jobs. It hadn't been doing that u...

Jacen by Contributor
  • 4 replies

My Canon imageCLASS MF4770n is not printing.

Hi,  My printer is not working, I've been reviewing for possible causes but I'm not exactly sure of what it can be. So I'm going to list the stuff that I consider critical that could be avoiding the proper functioning of the printer.  1) Drivers for ...

ajpaezm by Apprentice
  • 4 replies

How to turn this setting off

Does anyone have any idea how I can stop our C5535i from printing this everytime we print documents in our office? We are wasting alot of paper. Any help would be great, thanks!

timxm by Apprentice
  • 1 replies

MF 733 cdw prints small

The output print job from my MF 733 cdw looks to be about 75% of the original size. How do I adjust the output so that it prints 100% or fills the page?

mklrnzn by Apprentice
  • 1 replies

Resolved! Canon ImageCLASS MF269dw - Printing Issues

Hey y'all, I'm having several printing related issues: Basically, it won't always print, but when it does, its often very slow, especially with PDF prints. By slow, I mean it took 20 minutes to print approximately 7 pages from a PDF. Now, the print h...

MF644C error code E202-0002

Printer is 2 days old... getting Error Message E202-0002cant find anything about doesn't reset when turned off...HELP... nice printer for a few tests, but it's getting frustrating now...Thanks...

bgj by Apprentice
  • 1 replies

New Computer & MF8300C

Hello, Setting up a new computer and have downloaded the driver package for the printer.  When it tries to find the printer on the network, it says not found.  But it is on the network.  That has been confirmed by accessing the device list on the rou...

MF741Cdw Scan to email addresses

Hello,Scan and send via emailI have followed suggestions in this thread,, and successfully manged to set up the feature and ...

sunaz by Apprentice
  • 3 replies

Canon ImageRunner 1025iF not connecting via USB

I have a Canon Image Runner 1025iF and I'm not able to load the printer drivers.  When asked to connect the USB cable to the computer, the add printer wizard appears. The software continues to run until the message "not able to find the USB connectio...

My canon d1350 will not printer from usb

I got a used canon d1350 about a year ago. It would print and copy just fine when i got it. Now it will only copy. I can not get it to print at all. I have uninstalled the drivers several times. When i try to go and print a test page it give me an er...

Cannon Imageclass D320

Hello,I will need to change the pick up rollers on this imageclass. Does any one know how can’t find any info on it on the web.

Rays by Apprentice
  • 1 replies


Love my (4) MX492's. Never a problem with them.But the two new mf264dw's are another story! The are stuck on 2-sided printing and won't get off it. Sent hours in the set up etc and all indications say it should be printing one-sided (2-sided shows "o...

iarc by Apprentice
  • 1 replies

ImageClass MF4890dw scanner not working

I am having a problem with my ImageClass MF4890dw when I try to scan a document.It usually starts scanning fine but when it seems it is almost done it stops, the printer beeps and shows the following message in the display: 'An error has occurred. (s...

Capture.JPG Capture2.JPG IMG_0111[1].JPG

MF624cw No Longer Printing - Windows Update?

I have a MF624cw that up until few weeks ago worked fine, printed fast and great quality. Since it has not printed in good quality (fuzzy & mixed colors) if it prints at all. Usually the only thing that happens is it will sit there with the "Processi...

Getting started

New to the community? Here's some information to help you get acquainted:

03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.