EOS DSLR & Mirrorless Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Keep R3 EVF on at all times?

Is it possible to keep the EVF on the R3 on at all times? Even when we switch it to EVF only mode it blacks out when your face is not near the eyepiece. That wouldn't be a problem if the blackout lag wasn't so bad. Both me and my colleagues haven't f...

Anonymous by Not applicable
  • 1930 Views
  • 5 replies
  • 0 likes

Additional Lens for T2i

Hi,I have a T2i (at least 8 years old - purchased new) and I am looking for a zoom lens for taking mainly landscape and some nature photography. I have been doing some research on mount type, but I am getting conflicting information. From what I can ...

mi77915 by Apprentice
  • 6451 Views
  • 7 replies
  • 0 likes

Pairing an EOS R with a microscope

Hello everyone!My name is Kate, and I'm a microbiologist from Boston.I have a question regarding the possibility of capturing extended video footage of microorganisms under a microscope using a Canon camera. Currently, I own a Canon EOS R camera and ...

Can I use other lenses on canon EOS 750D?

Hi thereI have SOME lenses which I would like to use on my Canon EOS 750D but I am not sure if there is an adapter for these lenses: REVUENON 35MM AND 135 MM AND ROKINON 200MM Can you please recommend me if I can buy an adapter ?thanks in advance for...

Composition Grids for EOS 5D Mark IV

I would like to know if it is possible to upload additional composition grids, in live view, to my 5D Mark IV.  I would like to have access to The Golden Ratio, Phi Grid, Golden Spiral, Golden Triangle, Diagonals, and Dynamic Symmetry.

jrstoll by Apprentice
  • 2109 Views
  • 6 replies
  • 0 likes

my t4i will not read any SD cards

When I try to take a picture, it says: "Card cannot be accessed.  Reinsert/change card or format card with camera." So, I try to format the cards, and it says "Cannot format.  Change card." I have used both these cards before and never had a problem,...

EOS 1v aperture won’t change

Recently I had an issue with autofocus while using my Canon 1v. I cleaned the contacts on lens and camera and it began working again. Same lens/camera setup - now autofocus is working but aperture is stuck at f/2.8. Put lens on other camera and every...

ABC_ by Contributor
  • 2907 Views
  • 5 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements