My new printer is a Pixma TS200. The 2 ink carts. Are PGI 243 BL and CLI 244 COLOR. Is the CLI 244 COLOR cart. interchangable with the CLI 246 COLOR with this printer? I ask because I'm having trouble finding a CLI 244 easily.
Whether i use wireless or wired connection, it takes way too long to send the picture file to the printer. I've tried 2 different files, a large 10mg and a smaller 129k and both require a long load time. Using the acurséd Windows 10 and Firefox. How ...
All other colours print but not black , it advises to replace toner which is new
Hope somebody can help. Went to print something - colours were awful so I ran the maintennance process: Printed the nozzle check pattern - no cyan!Cleaned the print heads - still no cyan!Followed deep cleaning process - still no cyan!Put new cyan ink...
I have a Canon MG7760 printer/scanner which has worked well for years. Yesterday, my daughter was printing successfully, and then it stopped working. It makes all the expected noises, moves the head back and forth etc, but the pages all come out bla...
Scanning a document containing a picture and text produces three separate files. The scanner divides the photo into a single photo, and the text portion as two paragraphs as two seperate files. I have a pixma MG2522 running on a Windows 10 laptop.Thi...
Hi there, I am going totally nuts. My Canon Pixma IP8720 is not being found by my Mac computer (running Mojave 10.14.5). I have tried reloading the drivers, I have tried connecting it via a USB cable and still the printer cannot be found. The power l...
Hi, all of a sudden, my Canon Pixma MX922 won't print the body of a print job. It will print the website info at the top of the page but the body is blank (when printing an email for example). It also only happens on my husband's user profile (Wind...
I have ordered a Pixma TS8220. The documentation states that the XXL cartridge produces 6X the prints.The specs state that the Standard cartridge contains 5.6 oz and the XXL contains size is 11.7 oz.How can 6x be possible??
My Pixma MX870 just ran out of black ink in the larger port (220). Can I use a 221 Black in that same port until my 220's arrive?
I just purchased this printer and installed it to my computer and it will not print. I keep getting "Printer not responding." It doesn't seem to be communicating with my computer...any ideas?
My Canon Pixma TS8050 has stopped printing any colours other than Magenta and PGBK black. I am using genuine Canon cartridges and have tried replacing a cartridge, but no effect. I have also run the Clean and Deep Clean routines multiple times, to no...
My computer is telling me the paper output tray is opened. It is not. I just had the ink replaced thikning that was the problem. It was not. I tried a hard reset, air dusting, cleaning and moving things around. It did not help and i cannot clear this...
The above error just came up on my printer. What do I need to do? Thank you so much.
Only the top quarter of the black ink printed page is effected with horizontal white partial distortion on some lines. I can still read the text, but some of the lines are partly smeared with a thin horizontal unprinted portion. It seems to be a clog...
| Subject | Author | Posted |
|---|---|---|
| 12-27-2024 08:29 PM | ||
| 12-27-2024 08:25 PM | ||
| 12-27-2024 05:09 PM | ||
| 12-27-2024 04:47 PM | ||
| 12-27-2024 02:31 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
