I wanted desperately to print on a No 6 3/4 envelope (6.5"x 3.5'), even though clearly the Canon MX922 sheet feeder didn't accommodate them, as they are too small. But I tried anyway. It fed one, then the next jammed. One was retrievable, but the oth...
I bought this printer just for the faxing capability. Can I set it up to fax without ever connecting it to a computer? There is no phone line near my computer so I was hoping I could just set it up where the phone line is without a computer.
Bought a Canon G4210 tank printer. Downloaded the owner's manual. Couldn't find anything on escape codes. Tried the standard PCL codes - no joy. I'm specifically, looking for the escape code sequence to place in a text file to force a page feed. In ...
I have an alignment issue with my Canon MG3560S. I've gone through the print head alignment process (5 times now), and also wiped over the inner ribbon/bar, removed the black cartridge and checked there's no grease or gunk in there. Nothing works. An...
Whenever I try to print anything an error message comes up on my PC and won't print. I've tried messing with the printer settings and doing hard restarts but nothing seems to make a difference. Any ideas?
What I've tried: 1. Windows 10 version 20H2 with KB5001649 installed as per here: https://support.usa.canon.com/kb/index?page=content&locale=en_US&id=ART179473 2. Set Canon MX450 series Printer WS Properties to:Preferences > Quick Setup > check Grays...
Hi, Can anyone guide me on how to install my scanner for the MG 2100 Series. My scanner has not been working since I installed Windows 11. It had been working when Windows 10 was installed. Any assistance would be appreciated. I desperately need to s...
My PIXMA IS9100 printer is using 280PGBK, 281BK, 281C, etc size ink cartridges. Can the XL and/or the XXL size cartridges replace what it has now? How do the XL and XXL cartridges differ physically from what is installed now? Thank you,John
i tried to install a new cartridge and it keeps telling me i haven't installed it correctly and that it doesn't recognize a cartridge. i'm installing it correctly so i don't know what to do. i've tried turning it off and then back on and that doesn't...
Hi, I Can not scan at native 1200x2400 native optical resolution Pixma MG5320. Only 600dpi in windows. Tried:1. Control panel > printers and scanners2. Win 10 > settings > Scanner3. Canon IJ Scan utility.All of there only allow 600dpi.Please help fin...
We are in a classroom situation with two Canon 8730s hooked up to iMacs via USB. We can send a job to the printer and it will start printing and then just stop, mid print. At first we thought it might just be a delay; sometimes it would start up agai...
only 3 years old TR8520. it first stopped ADF copying from mid 2021, now it prints out only Blank Papers while everything else works - it scans, faxes, but when it prints it prints only blanks. It is not the ink because I installed a new set inks of ...
Hello!my Pixma MP240 gives message 'failed to open a connection to the device (-21345) when attempting to scan. This printer/scanner has worked well for many years, but will not scan (still prints fine) now that I have upgraded to a new mac running M...
I need to know why I keep getting an error code 02050033 every time I try to install the IJ scanner app on my windows 11 laptop.
I recently purchased and installed a Cannon MG2500 printer. For the most part it is working OK but I am unable to get it to set a margin of .5 inches for the bottom of my documents and print. It keeps telling me that .5 is outside the set range for t...
| Subject | Author | Posted |
|---|---|---|
| 12-31-2025 02:10 AM | ||
| 12-30-2025 03:26 PM | ||
| 12-30-2025 01:20 PM | ||
| 12-27-2025 03:38 PM | ||
| 12-19-2025 11:55 AM |
New to the community? Here's some information to help you get acquainted:
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
