Canon PIXMA MP560 printer prints orange color instead of red, and black color instead of green? Have replaced new red ink cartridge twice, made several color copies with both new red cartridges, all printing orange color for red and black color for ...
I have a pixma tr8620a and it is showing that I ran out of yellow ink but the cartridge is still half full of ink. I cannot print because of this error code, how can I bypass since I still have plenty of ink?
My TS 8500 will only partially print in gray. It improved with several deep cleanings but I can’t get it to print fully. Any help would be appreciated. Thanks
My printer has always been temperamental and I've had to reinstall print drivers a few times. I have changed the ink cartridges and the new one is printing pink. Light blue is blank which is an issue as I have some headings in light blue that I am ...
Dear Community, I have enjoyed the G7020 printer for years, but the printing has failed. All of the manual-recommended steps to clear print head, etc have done nothing to improve the printing. This includes Black ink as well as Colors. I can only see...
MG3620 did setup and connected to Wi-Fi but right at the Register Printer pop up, the orange error light comes on and is constant and blue arrow just spins. Any help would be greatly appreciated
I have aligned heads, cleaned and deep cleaned heads, and cleaned the encoder strip all several times over. Have also changed cartridges. All other colors print as normal.
I have a new Canon G3270 printer. Every time I select "8 x 10" to print, the image on Canon Print page shows the image perfectly centered on the page, but when I print it on the 8 1/2 x 11 photo paper, it does not center. It prints it with barely n...
PIXMA MX922 screen says printer needs repair. Support code B200. What does that mean?
My G7020 black ink flush is not pulling ink into the supply tubes. How can this be fixed ?
I installed a new Canon TR8620a inkjet printer. I was able to connect it to my Windows 11 laptop via wifi and print on it. (I did learn that apparently this particular printer only works at the 2.4GHz wifi speed). My problem is trying to then print...
Have to pause printing job, unplug printer then re-plug printer back in then unpause job to get the printer to recognize the command. Any suggestions besides reinstall drivers?
Model Pixma TR4722. Windows 11 I just replaced a Canon 275 black cartridge with a Canon 275 XL because the printer said it was out of ink and wouldn't print. With the new cartridge it shows there is only 50% of the ink left. The 275 XL cartridge was ...
I'm having problems getting to print on photo paper. My options when I load the paper into the printer are KG 4x6 and I set it to glossy. There is not other 4x6 or photo paper option available. I set the printer setting in the computer to Photo Glos...
