Desktop Inkjet Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Huge printing

My printer is printing just about everything in huge print (like 48 font and above) Just tried to print a shipping label for a return and it didn't even fit on the page! And sometimes it prints things just right!  Help!?!?!??!

Rnady2 by Contributor
  • 1588 Views
  • 3 replies
  • 0 likes

MG5220 will not print on disks

I own a Pixma MG5220.  I bought a disk tray in order to print on disks. When I try to print a disk I get the following meassageA printer supporting the selected paper size is not installed.I have printer compatiable disksI have a disk tray for my pri...

nikki630 by Apprentice
  • 3033 Views
  • 3 replies
  • 0 likes

canon pixma mp-280

  There are a number of stupid and insane problems with this printer as implemented.   For example, the stupid "error" message "Prevent printer abrasion is set".  The feature of decreasing and/or preventing printer abrasion is excellent.  It should b...

TS8020

Help I can no longer print any documents or PDFs from my almost new printer! I ran a clean session and added new ink cartridges. Help what else is going on?  CMS 

pxma mx439 multifunction

i changed the black cartridge on my printer as i usually do and it not printing right it is skipping. im getting sentences with a white line in the middle. can anyone help please

Canon MG6800 not printing, just blank pages.

Hey guys -  My MG6800 reacts to my MAC and my windows PC when prompted - however, when the PC prints, nothing shows on the paper printout.....and when the MAC prints, black does not show on the print out.Cleanings have been performed and the printer ...

wesdg007 by Apprentice
  • 1247 Views
  • 3 replies
  • 0 likes

My Pixma 4200 not printing text

  Hello again...I have a problem that's worth asking for your help ..again...my black PGBK cartridge is not printing at all.  New cartridge, even new printhead but nothing...I've done the headcleaning and nozzle checks...the other colors are all perf...

Skipper by Contributor
  • 1075 Views
  • 1 replies
  • 0 likes

Resolved! MX 310 ink asborber

I have this printer and I get error that says ink absorber almost full. Where is this located and how do I clean it or change itThanksBen 

benstv by Apprentice
  • 3387 Views
  • 2 replies
  • 0 likes

MG 3500 Error Message

Experiencing a five-blink error on the MG 3500 printer. Troubleshooting indicates an issue with ink cartridges. Have used the same type. Have tried to install two new cartridges. Each time, the blinking continues. The messge on the computer indicated...

eafrank by Apprentice
  • 1195 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x