After cleaning the printer head and printing a nozzle pattern and replacing both black ink cartridges. The printer still does not print "black". The nozzle check pattern does print the colored lines but no check pattern at time. Please advise as to...
I have a MX870 printer that I have not used for a while and the printer head is clogged. The print procedure works fine--it just does not print well. I installed a new print head. I get a B200 error with the new print head, but not with the old hea...
I changed routers. Now its a dual modem. I have it set to where I am using the 2.4ghz.I am working on a widows pc. I was unable to print. So I uninstalled everything and tried to reinstall everything back. The setup goes through the whole proces...
I have a Pixma MX532. this morning I sent 3 pages to print (on two sides). The printer pulled the first page and printed it. Then it stopped pulling the paper. One sheet got stuck, which I was able to clear out. I cleaned the rollers twice, turned th...
I replaced the large print cartridge and when I do a new "Nozzle" check pattern, it still will not print the top grid lines.does this mean the head cleaner part is out?? it prints the colors on the check pattern, but not the black grid lines.thanks ...
My MG 2522 worked perfectly. It ran out of ink. I replaced the ink cartridges according to all manual and packaging directions. I tried to do the print test. It will not feed paper through. It starts, takes the paper about an inch, then stops li...
Getting a message that ink absorber is almost full. tells me to contact customer support, but printer is no longer supported. What to do?
I have replaced all of the cartridges, removed and cleaned the print head. Error message still displays. What is next step?
Just replaced my large ink cartridge (cannon brand); it will not print the above top row of nozzle "check: page; only the colors. no boxed pattern at top; usually means the large ink is not "firing" after replaceing with new; still will not print.is ...
Will the Pixma mX360 work with Windows 11?
I am unable to reset my ink level on my PRIXMA G3260Wireless MegaTank All-in-One Printer. Can anyone advise me?
The color ink stopped printing, Went through the cleaning, deep cleaning, ink flush processes to no avail. Opened the cover and there is no color ink (any of the colors - except black) to the print head.). How do I fix this beast?
my desire is that the printer would print and scan. If anyone have a solution.
I just set up a new canon g6020 and all prints are coming out super light.There are no lines and everything is super clear...just the color is as if the saturation or contrast has been turned down.I have tried editing settings on my computer and have...
Okay, I have a TR4520 Canon printer and have loved it. I just recently got a Cricut Explore Air 2 for the sole purpose of printing stickers. I purchased the white Cricut sticker paper, and so far have not had a successful print with my printer. I ...
| Subject | Author | Posted |
|---|---|---|
| 11-26-2024 07:24 AM | ||
| 11-25-2024 08:13 PM | ||
| 11-17-2024 11:04 AM | ||
| 11-11-2024 05:48 PM | ||
| 11-10-2024 10:44 AM |
New to the community? Here's some information to help you get acquainted:
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
