Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! TR7520 not printing till I run Windows 10 Troubleshooter

It pretty much as the title says.  The Printer (TR7520) works perfectly fine except it won't print and stalls in the spooler till I run Windows Troubleshooter.  Then it'll print like usual and the troubleshoot find no issue and then I'll close it til...

CL0v3 by Apprentice
  • 690 Views
  • 1 replies
  • 0 likes

Misaligned head?

I have printed some table and seen some heavily misaligned lines. I did a few rounds of head alignment and no joy. The strange thing I don't understand is that the alignment paper printed out does not seem too bad. Any help or suggestions apprieciate...

Scan_20210412 (2).png Scan_20210412.png
johnz by Apprentice
  • 581 Views
  • 3 replies
  • 0 likes

auto on/off

Just installed the pixma tr8520. the auto on/off only turns the unit off. Sending a print job to it  does not turn it on.

MX922

My Pixma 922 has sat unused for several years. I have set it up for wireless operation, connecting to a Mac (original use was with a PC). The computer is communicating with the printer, however no data is printing. I downloaded the drivers and I ran ...

CoachAD by Apprentice
  • 495 Views
  • 1 replies
  • 0 likes

Pixma MG3620 prints uneven and broken lines...

and some of the print was blurred but that part is better. I've performed all the cleaning that I can, have new ink cartriges, but the lines are now uneven and broken. I don't know what else to do that I haven't already done more than once in the mai...

jgreer by Apprentice
  • 573 Views
  • 0 replies
  • 1 likes

Resolved! Pixma 922: Cyan will not print

I have run cleaning routine several times.  new cartridges.  still, cyan will not print.  no evidence of it on test page.note: the pilot light on top/front of cartridge is not lit.  the lower light is.  all other cart's are working correctly. any ide...

mah56j by Apprentice
  • 1221 Views
  • 2 replies
  • 0 likes

How Do I Troubleshoot Green Tint and Blurry Printing

What do these maintence tests mean? How come everytime I print anything on regular letter size printer paper no matter if its color or just black and white text, it always comes out blurry and with a green tint? I ran the cleaning option on the print...

IMG_4960.jpg IMG_4961.jpg
wt02 by Apprentice
  • 641 Views
  • 1 replies
  • 0 likes

Black and White scan setting for MX522

Hi guys, I'm new to the forum.I have an MX522 (Pixma) and when I scan a two page document it comes out at 1.7mBI have the exact same scan from another scanner (that no longer functions) that is 224kB A friend who is more knowledgeable than I on these...

zipfunk by Apprentice
  • 504 Views
  • 1 replies
  • 0 likes

Main Black not printing

I have a Canon MG5750 we have done a nozzle clean loads of times and all the colours are great apart from the PGBK which is just doing nothing. How many times should we be doing the Nozzle Deep Clean I have done it 8 times now ? Do you have any other...

MX920 Series printer

I went to print a #10 envelope; never had a problem before. The envelope got jammed and is inaccessable from either rear of front.  Cannot even be seen, so likely mangled inside.  Is there any other way to get to and remove the jam? 

Habah by Apprentice
  • 534 Views
  • 2 replies
  • 0 likes

Is it normal to have to alter color density

I have a Pixma G3200. If I leave settings at their defaults, colors are a bit faded compared to other inkjet printers I've had, and text (which should be black) is more like dark gray.  If I adjust the color density to 20  (printer preferences-> Main...

rconstan by Apprentice
  • 597 Views
  • 2 replies
  • 0 likes

Can't print from rear tray TS6420

I can't print from the rear tray on the TS6420. The tray is selected, paper is loaded, but the print still comes from the cassette.I'm printing to fabric ironed to freezer paper, and glued to plain paper for stability.I have done this before with thi...

Unanswered Topics
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.