I just purchased a Canon PIXMA TS8350a. I unboxed it, removed all the orange shipping tape and plugged in the power cord. I didn't install any ink tank.When I press the power button I hear the print head moving for a few seconds, the scanner head mov...
Good morning,We changed wireless networks, and I reconnected our Canon MX490 via a wireless connection to our router. Afterward, the printer became stuck on Copy mode. I cannot print at all anymore, only make copies. I also tried connecting my laptop...
I'm having trouble locating the paper jam in my printer. I have opened up every area possible, looked under the ink cartridges to no avail. I have also gone online for help, but they proved to be a waste of time and not at all helpful. Can someone...
I keep getting a cod 7500 when cutting on my pixma tr4722
Any help on this matter would be most appreciated. I reinstalled the drivers and the last step will not complete.Again, the printer is connected to the laptop and it detects the printer but will not complete. Loses detection after about 5+ minutes.
Recently I downloaded CanoScan 5000/5000 F CD-ROM to test if this excellent scanner was still working. But I had to remove the TS9521C b/c it sprang into action each time I tried to scan with the CanoScan 5000 which never functioned after all that. S...
I removed a paper jam from the printer now it will not print. It keeps saying that the paper is not loaded into the tray correctly. I know that the paper is loading correctly. When I attempt to print the printer just makes noise and attempts to print...
As you can see on the right, the coloring, layout and lettering aren't in the same position as the original page as pictured on the left. Maybe it has something to do with printing lined paper before I got around with blank paper? I even tried clean...
I have a Canon MX922 printer that is about 5 years old. It wouldn't power up and I determined that it needed a new power supply. I got one and installed it. Now it does power up, but it is showing strange error messages that the print head is the ...
I have a MG2522 with a Mac running macOS Monterey 12.6. When I print something, it prints in the top left corner and is 4x3" in size. The paper size is set to A4 and the print preview shows it at the normal size.Can anyone tell me how to fix this?
Hi I have a Pixma MX922 printer that was gifted to me reading error code b200. I bought and replaced the print head but still having the same error code. Is there a way to reset it? Is there something else I can do? All new ink and have taken out/rep...
I have a working PIXMA iP8500 printer that needs new ink pads. Does anyone know if those can be purchased from somewhere? This printer has been pretty solid for years and I hate to get rid of it.
Hello Can I convert the tr7020a to an edible printer? If so, what edible ink cartridges can I use?
Hi all, I cannot find the driver of Canon MX360 to install on my macbook Ventura 13.5.1. Is there any support with this, please? Many thanks.
