Desktop Inkjet Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 



Lost my Canon MP600 CD and I can't set up my printer to my new PC also I would like to know if this model is wifi. Thank you

Rosinha by Apprentice
  • 1 replies

Replacement Ink Cartriges

I refilled my Pixma MP620 ink cartriges at Costco, but when I put them in, I get an error message (U150) that reads, "The following ink tank cannot be recognized". Is there anything I can do to have these cartriges recognized so I can begin printing ...

bennett by Apprentice
  • 6 replies


My MX 700 showed an error code 5200. I found instructions on this code and  removed the ink tanks. I checked and cleaned them. I then removed the printer head. I also checked and cleaned it. I replaced the printer head and the ink tanks. The ink tank...

Where can I find a tutorial for the Canon Pixma MG6220

I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intim...

Ken by Apprentice
  • 5 replies

pixma 5250

I have upgrade my computer to mountain Lion and myCanon pixma5250 will print but not scan.I have lost the Driver and I can not find any on Internet.Any suggestions pls?Have a nice day

stepol by Apprentice
  • 1 replies

Windows 8 problem with Pixma MX420

I've installed the Windows 8 driver  from your website.  It finds the printer without any problem in both the wireless and wired LAN modes of instalation.  It adds a Canon U Network Tool to my Desktop and I can print to it but I can't find anything e...

MHM by Apprentice
  • 1 replies

CanonScan 9000F Scanner Resolution

I just bought a CanonScan 9000F which says has 9600x9600DPI.  I bought the scanner to take close up of some flat engineering parts we have, not pictures.  When I open up the basic scanner controls, the highest DPI I can input is 600 DPI, not any incr...

i455 print head

 I have an i455 color printer.   It doesn't have a lot of hours on it as I only use it when I need color.  But it does a very nice job with color,  Recently it has stopped printing, in that it only prints blank pages.  Mostly   when I try to print it...

Getting started

New to the community? Here's some information to help you get acquainted:

08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5