Camcorders
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Edit and convert MTS/M2TS free

I like taking videos with my Cannon camcorder to freeze the sweet moments surrounding me. But it was not an easy thing to play the mts/m2ts videos recorded on the portable devices. when searching for the free solution, I found macx video converter fr...

Dannel by Contributor
  • 12799 Views
  • 5 replies
  • 0 likes

VIXIA HF R800, external mic not working

Hi everyoneI have a HF R800 mainly to record lectures, I also have a regular external mic,when i plug in the mic, it stops to record audio, if I unplug the mic then the machine does record audioalso the mic works on other machinesplease advise Thank ...

YSG by Apprentice
  • 40705 Views
  • 36 replies
  • 1 likes

Legria HF R67 as a webcam

Hello, I'm trying to use my Legria HF R67 as a webcam, but can't find a software to aquire video from USB connection. Any suggest? Thanks

maurbone by Apprentice
  • 601 Views
  • 2 replies
  • 0 likes

Resolved! Saving and Converting AVCHD

Hello all.   I have two questions here.  There first one is how do most people transfer the AVCHD files from their Canon video camera to a hard drive for archiving?  I used to use "Data Import Utility" and this program would identify the files not ba...

NJMike by Contributor
  • 1310 Views
  • 5 replies
  • 0 likes

Changing aspect ratio on Vixia HF R800?

I am having some issues friends!  I have been running our Canon Vixia HF R800 as one of our video sources on our Yolobox (yololive).  The picture is crunched, which I know is an aspect ratio issue.  I have no access to change the aspect ratio on the ...

rambomj by Apprentice
  • 665 Views
  • 1 replies
  • 0 likes

No Audio From Vixia XA-11 Camera Speaker

I just shot some video with my new Vixia XA-11. The video clips look great on playback...but NO audio comes out of the camera speaker! Yet I can hear the audio tracks OK with headphones. I'm using Saramonic Vmic Mini connected to the MIC input. Thank...

Viewdoo by Apprentice
  • 469 Views
  • 1 replies
  • 0 likes

Canon XA40 HDMI Output issue

Hi,I can't find instructions on turning on the HDMI output for the XA40, it seems to be off and the manual only shows instructions for turning it on for the XA45, which is very frustrating.  I just want to hook the camera up to a capture card for Zoo...

Gartcat by Apprentice
  • 1257 Views
  • 1 replies
  • 0 likes

Convert data on micro cassettes

I have a ZR20 with movies on a few dozen micro cassettes.  Is there a way to transfer the movies from the cassettes to an iMAC?  Thanks for any help.

ddddan99 by Contributor
  • 814 Views
  • 7 replies
  • 0 likes

It's NOT phantom power! It's BIAS power!

People keep using the term "phantom power" incorrectly when referring to a microphone with an external battery or needing low power from the source. The correct terms for just about anything using a 1/8" (3.5mm) jack (TRS or TRRS) are "BIAS POWER" or...

616SYw5nBIL._AC_SL1500_[1].jpg

VIXIA HF M30 - External Video Capture?

I know the camcorder doesn't have the built-in ability to stream video but I'm wondering if it's possible to buy an external video capture device to capture & stream live video. Anyone? Thanks!

thumdar by Apprentice
  • 897 Views
  • 2 replies
  • 0 likes

XA50 USB to Mac (High Sierra) for clip transfer

Hello,Has anyone successfully USB connected the XA50 to a Mac and import into FCPX?I connected the camera and momentarily it was visible in FCPX's import dialog but then quickly disappears. Perhaps it's because of my old OSX? I have a straight USB ca...

sunra by Contributor
  • 957 Views
  • 5 replies
  • 0 likes

Canon Vixia RF800

Hi there, I have a Blue Yeti Microphone here, however, would it be possible to connect that mic up to the Vixia 800? And, if I am able to, how would I go about doing that? Links to cords that I would need to connect the mic up to the Vixia 800, would...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM