Is the service still available to upgrade my old C300 Mark 1 sensor to the Dual Pixel Auto-Focus sensor? I think it was a $500 upgrade awhile back. I have this old C300 that I'm just wanting to use as a basic Youtube cam, and having the auto-focus wo...
Hi all, I’ve been reviewing the Netflix C70 guide, and it references a LUT that converts C Log 2 to C log 3. I’ve downloaded all of the LUT from Canon’s website, but don’t see any LUTs with a “from c log 2 to c log 3” title. Any ideas? Thanks!
So I noticed that when connected to the SDI port (not the monitor SDI) my cable is very loose and any bump or even shake of the camera the connection is temporarily lost. When I tested the monitor sdi port the connection is very tight and I don’t hav...
Wow, so looks like a new FW update in December will allow the R5C to do 8k 60p RAW with no external power and JUST the LP-E6P battery: https://www.canon.co.uk/press-centre/press-releases/2024/11/firmware-updates-add-extensive-new-functionalities-to-c...
Hi All, I just received my C80 and am learning it. I noticed something peculiar. I am shooting in UHD 3840x2160 @ 59.94 fps. I have the camera connected to a Blackmagic Hyperdeck via SDI which is configured to accept this signal.When recording footag...
Hi, I was wondering if anyone has had an issue with channel 2 of the canon C300 mk2 cameras. I can see the signal coming in and can monitor it via headphones, but all I get when I listen to the recoding is a very faint and distorted sound I can barel...
Hello -We recently bought 3 units of Canon PTZ CR-N300 cameras for media streaming. We want to integrate these cameras with our existing network, which is powered by a Cisco Catalyst 3650 48-port Gigabit switch with 390W PoE+ IP base. However, when w...
Hi there, is there a 3d model or 3d scaled drawing of the Canon cr-n500 camera? i would like to make a case but cant find a template drawing to model the case design to anywheere. please help
The C70 manual says that you can plug a "commercially available controller" into the remote A jack, as an alternative to the RC-V100. (Manual page 11, 110, 194.) Given that the RC-V100 costs £2,780, I'm quite interested in using the "commercially av...
Hi Everyone,In Canon R5C Color Profile settings, when choosing the Clog3 profile, there is an option to edit the profile. If you set it to unprotected (which is protected by default), you can find settings for Color Matrix with three options Neutral,...
Recently I've purchased the R5C from Amazon from a verified seller. The product came with original box and accessories. There's no issue with the camera its self but I'm having a problem registering it to my Canon account. It's stating originally the...
Hi, I recently upgraded my Canon HF-G10 camcorder to an HF-G30. I was considering the HF-G40 but a very good deal came up on a new HF-G30 that seemed too good to pass-up. Automatic White Balance (AWB) on the HF-G10 was, in my opinion, very good - ada...
Note to admins/moderators: PLEASE DON'T SHADOWBAN OR HIDE THIS by sticking it behind my previous posts the way you did wth my last one. THAT DOESN'T HELP ANYONE. I finally got my XF605 working with FTP transfer and other networking functions but al...
Hello everyone, I received an XA70 today. So far I have only charged it and made myself familiar with the menus.The camera emits various ticking and clicking sounds when it's being switched on, as the video hopefully shows. There's less such noise wh...
Anyone still use these in 2024? Should I get one or save for the c70 c80 or c400. I mostly shoot interviews and talking head shots
