xf 400 Face rec not able to highlight
Im not able to highlight and use face rec on my Canon xf 400.
Posts
C200 SDI Output & LCD Monitor Problems
I have two Canon C200 cameras. Both have just lived in my studio (not traveled, indoor, climate controlled, etc.) and neither has any physical damage. One of my C200 cameras stopped outputting video from the SDI port. It still outputs from the HDMI p...
Resolved! Custom function menu mode for the Canon R5 C
I own the Canon R 6 Mark II and l am able to take pictures with Manual focus only lens, l had to enable an option using the custom function menu function.I recently acquired the Canon R5 C for cinematography as well as photography and l cannot find t...
Resolved! XA-11 audio selections greyed out
I was in the middle of the shoot when the audio went out. When I looked in Function, I noticed that Audio Scene and Audio Levels were both greyed out. What's going on?
EOS R5 C Firmware update 1.0.9.1 still running after 45 minutes
I have updated firmware on this camera several times before and never had a problem. This time, the process started, but is still running after about 45 minutes. The instructions indicate it should take about 10 minutes. Am I in trouble here??
XA30 won't read or initialize SD cards
I just bought a Canon XA30 and I can't get it to read my sd cards. I have tried different sizes from 2gb- 256gb none of them work. I also tried to Initialize in camera but it will prompt me{Process terminated with error}. I have also tried reading t...
C80 missing 120fps with audio
So with the C70 you were able to shoot up to 120fps with audio. Right now the C80 caps at 60fps with audio. Any chance we will see a firmware update to add this in?Thanks
EOS C300 DPAF upgrade?
Is the service still available to upgrade my old C300 Mark 1 sensor to the Dual Pixel Auto-Focus sensor? I think it was a $500 upgrade awhile back. I have this old C300 that I'm just wanting to use as a basic Youtube cam, and having the auto-focus wo...
C70 - Where to find the C log 2 to C log 3 transform LUT
Hi all, I’ve been reviewing the Netflix C70 guide, and it references a LUT that converts C Log 2 to C log 3. I’ve downloaded all of the LUT from Canon’s website, but don’t see any LUTs with a “from c log 2 to c log 3” title. Any ideas? Thanks!
R5C 8K 60p RAW w/ JUST an LPE6P via FW update!
Wow, so looks like a new FW update in December will allow the R5C to do 8k 60p RAW with no external power and JUST the LP-E6P battery: https://www.canon.co.uk/press-centre/press-releases/2024/11/firmware-updates-add-extensive-new-functionalities-to-c...
C80 - SDI output resolution during playback
Hi All, I just received my C80 and am learning it. I noticed something peculiar. I am shooting in UHD 3840x2160 @ 59.94 fps. I have the camera connected to a Blackmagic Hyperdeck via SDI which is configured to accept this signal.When recording footag...
Resolved! Channel 2 of EOS C300 Mark II not working properly
Hi, I was wondering if anyone has had an issue with channel 2 of the canon C300 mk2 cameras. I can see the signal coming in and can monitor it via headphones, but all I get when I listen to the recoding is a very faint and distorted sound I can barel...
Resolved! Canon PTZ CR-N300 not working with a PoE+ switch
Hello -We recently bought 3 units of Canon PTZ CR-N300 cameras for media streaming. We want to integrate these cameras with our existing network, which is powered by a Cisco Catalyst 3650 48-port Gigabit switch with 390W PoE+ IP base. However, when w...
CR-N500 3D printer model for custom case build
Hi there, is there a 3d model or 3d scaled drawing of the Canon cr-n500 camera? i would like to make a case but cant find a template drawing to model the case design to anywheere. please help
C70 Remote jack & commercially available controller -- how?
The C70 manual says that you can plug a "commercially available controller" into the remote A jack, as an alternative to the RC-V100. (Manual page 11, 110, 194.) Given that the RC-V100 costs £2,780, I'm quite interested in using the "commercially av...
