Hello, I have a Pixma Pro 10 and it used to work well but now I have issues. I thought it was because of the 3rd party cartridges so I bought two complete sets of Canon official ones but I have still the same issue. I did a couple of different clean...
Hi all, I had to take apart my computer and printer due to some painting. When putting everything back together the Pro 9000 Mark II does not show on printers and scanners on my iMac running El Capitan. Bonjour does not show it to add back to printer...
Just bought a new iMac running Mojave and cannot print anything on my 9500 MKII. Get a "Filter Error" everytime. I now realize Canon does not support this printer/OS combination. Has anyone had any success getting a 9500 MK II to print in Mojave? If ...
I've literally tried everything. The printer is connected to the Wi-Fi network and the software picks it up. The regular driver installs properly, but the XPS driver hangs at the very last second during install. It worked without issue on my Windo...
Hello,Just bought a new Pixma Pro 10 printer, following the set up instructions and get to the point where i hit the on button. the on button is white and the button below is flashing orange and is sounds like the the print head tray is making a squ...
I have tried cleaning via the utility for bottom plate many times but whenever I use 110lb cardstock these black dots and lines, mostly on the edge of the left side of the paper, are on the back. I am at a loss as to what to do. I did every cleaning ...
Hello, I have a Canon Pixma Pro 100 printer brand new, all the ink is filled and the headers cleaned extc....My issue is that my designs are printing very washed out. Looking liek there is no contrast of vibrancy. I am designing on procreat on my ipa...
I recently purchased Canon Pixma pro 100. I'm not sure if there is any compatible software to Print Studio Pro as I can not for the life in me get this software to work. I work on a mac and use Affinity as my photo editing software. Against my bette...
No matter what I try I get a paper feed error.
Hi, does anyone know if possible to print just using the black ink cartridge on the Canon Pro-100? I have a lot of plan drawings that all of sudden I need to get done at home. I want to save my colors for my photos.thanks in advance
I just tried to print to my Pro-100 and I get a message"Attention required". That is all I get, no error number or anything else to tell me what might be wrong. Any suggestions as to what to do with this one? Is there anyway to tell if a particulal...
Pro-100 printer, Windows 7, and Canon Photo Paper Pro Premium Matte paper. No matter how I try to set up this combination I get nowhere. First of all the printer tells me I must use the manual feed, OK I set that up. then it tells me I can't use Phot...
My settings (print quality in particular) in printer preferences don't stick between the time I set them, then close the dialog box, then open again. It reverts back to standard print quality after I set it to high or highest. I've tried through Wi...
Writing from Washington state. My Amazon purchased Pixma Pro 10 printer has always refused to load --only offering it the Canon approved photo paper which came with the order from Amazon. (Glossy or "luster" I don't have the label but have all sheets...
I have a Pro-10 and have learned the hard way that the print heads need to be cleaned regularly. Of course, I'm contantly forgetting to do that. What I'm looking for is a way to have the head cleaning happen automatically. I'm on a Mac, so I looked f...
| Subject | Author | Posted |
|---|---|---|
| 05-05-2024 09:32 PM | ||
| 05-05-2024 03:21 PM | ||
| 05-04-2024 03:35 AM | ||
| 04-29-2024 09:51 PM | ||
| 04-29-2024 04:11 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
