cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon PIXMA pro100s printing issues, please assist!

Julian
Apprentice

Hello all, 

 

I would really appreciate it if someone could give me some assistance with my canon Pro100s printer. Recently it has started printing my images with a thick, sometimes thin, border down the right long-edge of the paper, but not over the print area itself, it just squashes everything over to the left. It is never the same color, sometimes black, grey, magenta, or a dark mixture of all the inks. If my explanation isn't quite clear enough I've attached a photo to see exactly what's happening. Most of the time it prints correctly and every 4th or so page it prints the border and once it starts it does it more frequently. 

 

image.jpg


I'm hope someone can help me solve this issue. I couldn't find anything thing online about a similar issue, partly because there are so many discussions to wade through.

 

Thanks all! 

1 ACCEPTED SOLUTION

Hi Julian.

 

I print from W10. I primarily use LrC.

 

I don't have any silver bullet recommendation for you. Try reinstalling the latest driver and version of PSP.

 

Confirm that yoiu are not using the WS version of the printer in the Devices & Printers section of Control Panel.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

View solution in original post

4 REPLIES 4

jrhoffman75
Legend

Welcome to the forum.

 

What OS and printing software are you uisng?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Julian
Apprentice
Hi John,
Thanks for the response. I am using windows 10 and printing from photoshop CC using the Canon Print Studio Pro plugin.

Julian

Hi Julian.

 

I print from W10. I primarily use LrC.

 

I don't have any silver bullet recommendation for you. Try reinstalling the latest driver and version of PSP.

 

Confirm that yoiu are not using the WS version of the printer in the Devices & Printers section of Control Panel.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Julian
Apprentice
Okay, so I have reinstalled the driver and software and am a bunch of prints in with no issues. If the problem starts again I will report back, but so far it seems good.
Thanks for the help!
Regards, Julian
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.