I have a Canon Pixma Pro-1 printer for three years, I print about 100 photos 10 x 15 cm a month. I use only genuine Canon inks.She started printing the stripes on the photo regardless of paper (glossy, matt, satin). The test print is OK, the CD print...
I've read other posts on this subject, but I haven't seen an actual fix for the issue. If I have to send my printer back to Canon, who's paying for the shipping and the repair?
My Canon Pro-10 is not printing blacks correctly and is faint overall. Instead of black, the color is a ghostly blue. The whole picture also appears faded. I've replaced all the ink cartridges and have cleaned the heads. How do I fix this? Here i...
Hello I am getting a single light band on dark images on my PRO-1000 at the end of the paper for dark images (the last part to come out of the printer)It occurs in both the rear and manual tray.It appears at the same locatation on seperate prints.No ...
My Pixma Pro9500 will no longer print in color. The black and white images are fine, but the color is VERY VERY faint, almost non-existent. I did all of the maintenance available including cleaning and deep cleaning the heads. Any help or suggestio...
New to printing, have never used a printer before and for some reason i decided to buy this printer. I can not seem to get color correct on any prints, i am using the paper's respective ICC profile (canon pro luster and hahnemuhle deckle egde.) and t...
My Pro 100 doesn't print exactly on the disk. It misses the top third of the disk and gets ink onto the K tray. Ive tried different settings and nothing seems to work. The Fit setting is to low on the tray and the contact setting is to high and is re...
I have a Pro-100 that I purchased almost a year ago, however I am on the road most of the year, so it's run less than 75 prints Only one of those prints has colors that I consider to be "dead on" or even close. Here's the data: I use three different ...
After printing good 8 X 10s, my Pro-100 started malfunctioning. The paper seems to register OK, and it prints about the bottom inch of the image, then ejects the paper with an error light that gives two flashes. The manual says this means "printer i...
Hi guys. I just got the PIXMA PRO-100 and did a few letter sized and A3+ prints, and the latter is VERY smudgy !!! For example, this is a letter size photo that came out fine: https://i.imgur.com/4IaxPa7.jpg?1 This is the same picture printed on a3+ ...
The location where I'm setting up a PRO-1000 printer makes it impractical to use the PC's UPS. My power seldom fails and the chances of a power failure during printing is highly unlikely. What are the disadvantages if power is interrupted to the prin...
No apparent rhyme or reason. I've had the printer about a month and this just started recently.
Hi, I will soon start a personal project in contact printing (Cyanotype, Gum, Argyrotye, etc) and I need an affordable printer to make digital negatives from a 5D Mark IV files. I am thinking about the Canon Pixma-100 for digital negatives. The print...
The black ink of my pro-10 is clogged. Several deep cleanings doesnot resolve the problem. Now i read in the knwledge base that reseating the printhead could resolve the problem. I do not understand why. I like to know this before doing the reseating...
I just received a PRO 1000 and I have not set it up yet. I'm wondering how practical it would be to locate it in a room in my house other than where my computer is. Reasons for considering a remote location: 1) Physical space limitations2) Concern ab...
