Canon Professional Photo Printers Forum

Changing the printhead on a Pixma Pro9000 Mark II

Is changing the printhead on a Pixma Pro9000 Mark II a big deal? Or can a chubby, old, retired guy do it without a lot of trauma? It is really hard to imagine how un-handy I am.

Resolved! Pixma Pro-100 Poor Print Quality on 11 x 17" paper

I have a brand new Canon Pixma Pro-100 that prints great on the 8.5 x 11" Pro Luster paper included with it, but horribly on 11 x 17" Xerox Bold 80 lb Coated Gloss Digital Printing Paper. Everything prints splotchy/blurry and wet. The color is reall...

Pixma Pro 10s print head flushing

Hi, I have a Pixma Pro 10s which printed great photos when I first got it. Unfortunatley I didn't realise that leaving it for long periods of non-use would affect the print head and a drop in quality of print would occur. This seems to have happened ...

Pro 10s - flashing red lights against 2 new cartridges

Hi I hope you can help. Today I printed a print and noticed that the colours were way off, this is the first time Ive used the printer since recently replacing two ink cartridges, cyan and magenta. And have never had issues with prints matching the s...

Photoshop Elements or Studio Pro color management

I am having so much trouble getting quality prints from the Pro 100. My inexpensive TS6120 is producing a much better quality print. What I've tried:setting ICC profilesusing Canon photo paperdisabling printer color management and letting Photoshop...

Pro 1000 misfeeding

I just purchased a pro 1000. tried to put my first few sheets of phot paper throguh it after running the head alignment (which failed btw) I now get a misfeed on my paper in that the paper will advance aprox 1-2 inches through the printer (giving me...

Canon pro 1000 and 0,98 inch border papers

Hallo, I read on owner manual that I can use a 0,98 inch borders on specific papers. How I can discover if my paper is a 0,98 inch paper? I use Hahnemuhle

Pixma Pro9000 Mark II won't start

I was printing something with my Pro9000 Mark II and about halfway through the sheet the printer just died. Now it won't start. Everytime I turn it on it flashes between the green and yellow light. It flashes rapidly between the green and yellow, ...

Issues with the end of a print with Pixma Pro 100

I'm having a bit of an issue. I bought the Pixma Pro 100 two days ago brand new and hooked everything up correctly. Ran all necessary tests. I then tried to print off a photo. Everything is fine on the paper until the very end of the print, where the...

Resolved! Canon iPF670

I have been trying to print some images and was using Advanced Preview to view the image and print. It worked briefly and then I started getting error messages that the advanced monitor crashed and they were sending the log to Apple. Does anyone kn...

Canon Studio Pro

Hello, I am really struggling to instal studio pro to photoshop on my new windows MSI computer. I have windows 10, and I have installed the download for Studio Pro, but I cannot for the life of me instal it to photoshop. I have been trying for hours...

Pixma Pro 100 Print Head Lock Lever Missing

Hello,I purchased a Pixma Pro 100 from some amazon warehouse deal, however upon trying to print the orange light kept flashing, which apparently meant the print head wasn't installed properly. After looking around I realized that the print head lock ...

Resolved! Pro-1000: never turn it off?

I've learned the Pro-1000 uses at least a smidgin of ink clearing the printhead every time you turn it on. Some folks suggest just never turning it off, to save that smidgin of ink. Will doing so harm the printer? Is there enough heat generated to...

Needing A3 printer to replace i9950

Hi,My first time posting here. I am seeking some advice. I have decided to not go into detail as to how ( it is a long story) but I think I have killed my i 9950 (Suffice to say printer head problem related).Loved my i9950. The only thing I have n...

Pro 1000 and scratch due to metals wheels

Hallo everyone, if I make a print with a lot of black areas, I noticed the printer left sometimes some signs on the paper. These little scratches are made from the metallic wheels that helps to tray out the paper. I tried both canon photo luster pape...

Canon Community

Posts

Changing the printhead on a Pixma Pro9000 Mark II

Resolved! Pixma Pro-100 Poor Print Quality on 11 x 17" paper

Pixma Pro 10s print head flushing

Pro 10s - flashing red lights against 2 new cartridges

Photoshop Elements or Studio Pro color management

Pro 1000 misfeeding

Canon pro 1000 and 0,98 inch border papers

Pixma Pro9000 Mark II won't start

Issues with the end of a print with Pixma Pro 100

Resolved! Canon iPF670

Canon Studio Pro

Pixma Pro 100 Print Head Lock Lever Missing

Resolved! Pro-1000: never turn it off?

Needing A3 printer to replace i9950

Pro 1000 and scratch due to metals wheels

24' roll for backlit print on imagePROGRAF TC-20?

imagePROGRAF PRO-1000 - Windows 11 Pro driver and ...

PIXMA PRO-10 Clogged PBK

imagePROGRAF PRO-300 Yellow oversaturated since up...

Was anyone else forced to leave Canon because of t...

PIXMA PRO-300 Support Code 1062 when printing Aver...

imagePROGRAF PRO-1000 - No printer dialogue box wi...

I can't get my pro 1000 to print.

Can not print fine art paper on a PRO 300 printer

ImagePROGAF PRO-300 subtle horizontal strips on pr...