Canon Pro 100 printer
Why does the printer driver software limit the length of a panorama to 26.6 inches. Competitor printers allow up to at least 38 inches. Paper companies make 19"x 38" paper. Also longer rolls are available.
Why does the printer driver software limit the length of a panorama to 26.6 inches. Competitor printers allow up to at least 38 inches. Paper companies make 19"x 38" paper. Also longer rolls are available.
I just bought a few packs of canon plus glossy 2 paper but why on gods green earth don't they have options for that size in their printing software? If you try to custom make it leaves borders and there's no option for a borderless print. Just seems ...
Hi Folks, My Canon IPF6300 is throwing the following error code, 03130031-2F17. Something related to the fan platter. I sure could use some help. I was getting ready to do my weekly nozzle check but it showed the above code that I can’t get past.tha...
I have a pro-1 and I am having a banding problem. There are dark bands running horizonatlly that appear mostly in dark areas of the image. I did a nozzle check and the test looks fine. I alligned the printhead and there is still banding. Any help wou...
I can change the Ink setting in the printer software color. Adjust the color settings many times but this action repeat simultaneously in printing the dacuments. Please anyone can explain to reomve this missunderstanding between printing process.
All, Finally got my hand on the Canon Pixma Pro-100. So excited! That said, would like to have some recommendations on the type and size of papers that work best with this printer. Also, should I go through the trouble of calibrating the printer and ...
After reading many comments about the Pixma Pro 100, I purchased one for printing my greeting card collection. My NEW printer was setup one week ago. I need suggestions for printing borderless scored greeting cards, folded size is 5x7. In the page s...
Iʻm printing matte paper for now with my new Pro-2000 but would like to make use of the chroma optimizer. Yes, I know this is intended for glossy and luster photo papers, but after printing on matte I often apply an acrylic coating from Breathing Col...
Trying to get up and running with the new Pro-2000 but Iʻm running into some ICC issues. I use an X-Rite ColorMunki and i1Studio to creade ICC profiles for my papers, but the Pro-2000 is not printing accurately and I am losing a great deal of shadow ...
Magenta stopped printing on my PIXMA IX6550, so I went through the head/nozzle cleaning routine, plus a new cartridge. No effect, so I figured that there had been a printhead failure (although it was only 6 months installed). So after purchasing and ...
I don't understand the settings dry time and pause between scan. I tried to modify that settings on ldc panel of the printer on creating a custom paper with dry time, but I didn't notice any kind of difference printing a photo. Time to print with dry...
I've been printing with my Pro-100 for a while now and every now and then there will be prints that distorted once in a while but more recently it has been recurring a lot and I'm blowing through my ink doing reprints. The print below is an 11x17 pri...
Hi, I recently purchased a Canon Pixma Pro 100. I have professionaly taken photos that I'm trying to print. When I designate that I want an 8x10 photo to print on an 8.5x11 paper, it crops the photo. I'm also trying to print an 11x14 onto a 13x19 pap...
Nozze and alignment ok, printed with Lightroom, printer connected via lan, TIFF photo 16 bit, custom ICC and custom paper created with canon media config tool. Highest quality. Rare times I have some lines (horizontal, in the direction of movement of...
Hi All, For the longest time I've been trying to figure out if I want to get a printer and print my own stuffs, or to send it to a professional lab. After much deliberating, I have decided that I'll do both, especially for the specialized print job s...
Subject | Author | Posted |
---|---|---|
01-23-2025 03:15 AM | ||
01-22-2025 12:45 PM | ||
01-21-2025 06:22 PM | ||
12-15-2024 09:37 AM | ||
11-21-2024 01:24 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.