Professional Print & Layout is some of the worst software I've ever had the misfortune of dealing with. Can anyone recommend an alternative way to print to my Canon imagePro 2100? I've wasted far too much time, ink and printer paper dealing with Ca...
Hi, I've had a 200 for a few years now. Don't print that much with it, I did a lot with a Pixma 100, total workhorse. So this past week I needed to make some prints. My displays are color calibrated with Datacolor Spyder X2. So usually I don't need h...
I will be migrating to a new Windows workstation next month. I know the printer driver will need to be installed but I cannot find where the paper size settings that I have created are stored on my current workstation. I've looked under Users/name/...
I have a Canon Pro 1000 that I recently moved to a new home with. Before, I had it set up wirelessly with my MacBook and it would print fine. I now have it set up on LAN with my Windows 11 desktop and I can’t get it to finish a print. No error code...
When I try to run a color calibration on my new Canon Pro-1100, nothing happens. I have tried to run it from the printer's control panel (Maintenance | Color Calibration | Auto Adjust | Continue - yes | paper settings - Letter size - Pro Luster | Set...
I would like to request repair the Canon IPF 750 plotter. Thank you. Kevin
Just replaced my PIXMA Pro 100 printer with a ProGraf 1100.I realize there's always a learning curve, but the color of my image is not coming out right. (i.e.gray skies are lavender) Also, there's a vertical band of white (no color) on the upper rig...
Hello everyone,I have a Canon Pro 1100 printer, and I’ve encountered an issue a few times during printing. When I send a print job through the Canon PPL software, the printer display shows that it’s processing the print job, but the printer doesn’t a...
My imagePROGRAF Pro-1000 is returning a 7400 error code. I have performed all the troubleshooting fixes that are suggested in the manual - cancel all print jobs, turn off printer, unplug, plug in, turn on, but the printer continues to return the same...
I'm using Pro-100 printer. Decided just to be safe I'm going to download the printer driver file. Just in case. It increasing looks like I'm going to have to reinstall Windoze and everything. There is the PRO-100 series Printer Driver Ver.1.07 (...
I have a Pro-200 that prints fine from Photoshop but everytime I try to use the Canon Professional Print & Layout it tells me the paper width does not matych. I'm running Mac Sonoma 14.6.1 on a Mac Studio M1
I have a new Pro 300. I am trying to print a 13x19 photo in the manual feed. Everything is fine until I click the print button. It then runs the paper all the way through except the last inch and then tells me it has a paper jam. I have previously an...
Windows 11: have successfully loaded 2 media types to Pro 300, but now trying to load a Canon Fine Art Smooth paper w/o success. The media type appears in all under "Custom" along with the other media types, and printer has been updated, but the cust...
This evening I started getting scratches on my prints from my Pixma Pro 10. The scratches are parallel, slightly more than 1mm apart and numerous, prob about 40 or so on a print.The first few prints I printed were fine, then this. This image is in po...
I have been using the Pro-1100 for 3 months now, and my ink is almost fully depleted and the maintenance cartridge is almost full. I print every 2 days to avoid needing to run cleaning cycles, of various sizes but typically around 8.5" X 11"According...
