01-25-2025 12:45 PM
Hello everyone,
I have a Canon Pro 1100 printer, and I’ve encountered an issue a few times during printing. When I send a print job through the Canon PPL software, the printer display shows that it’s processing the print job, but the printer doesn’t actually start printing—it just stays idle. The only way to resolve this has been to power off the printer and turn it back on. After doing this, the printer processes the print job and prints as expected.
I’ve double-checked all connections, including the IP address, and everything seems to be set up correctly. This issue has also occurred during color calibration. The printer wouldn’t start the calibration until I powered it off and back on.
Has anyone else experienced similar issues with the Pro 1100? If so, do you know what might be causing this or how to resolve it?
Thank you for your help!
02-13-2025 04:31 PM
Hi Kikala,
Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below to log into your My Canon account:
https://mycanon.usa.canon.com
Once logged in, click on your imagePROGRAF PRO-1100 and then click on the Product Support button. When that page loads, click on either the Phone Support button or the Chat Support button to access support. A Technical Support Representative can determine the cause of the issue and resolve it or provide you with your available service options.
Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.