banner_featured.png How to Get the Most from Canon’s Software Tools for its Professional Inkjet Photo Printers Getting a print to match what you see on screen isn’t magic - it’s a process. And a big part of that process happens in the software. Wheth...
Hi, I needed to replace an ink cartridge, and right after doing so all of the cartridge lights turned off. I removed all cartridges, took out the ink tank several times, cleaned the area, and after many attempts I managed to get a single red light wh...
The printer wont turn on. I press the button and nothing happens. I have electric power to the printer. Anything else plugged into the outlet works. Anyone had this happen before ? thank you
Need help printing on Pixma Pro-200! I have a canon pro-200 pixma. I have tried every suggestion on how to print a 11x14 photo but they always come out 8x10! I've wasted so much photo paper it's crazy! I've set the size to default, all the setti...
My Pro1100 which I just bought in March 2026, had a total failure. I started a print and left the room, when I came back the print was done but the ink was smeared all over the paper and a piece of foam that is usually inside the carrier ? is now ...
Hi, after a nozzle cleaning solved some issues with my then-brand new 310 a couple of months ago, I'm back with a new situation. When printing on 5x7 paper, I'm getting an edge-to-edge band of lighter color in a consistent place near the trailing end...
Hi! I’m an artist and I’ve been using the Canon Pixma Pro-200S for my prints since January. Last week, I changed several ink cartridges, including most recently yellow, and now everything I print has a warm/reddish hue. I have tried toggling the colo...
I have a windows 11 machine. I have a pixma 100 printer. When I print in black and white the images come out in sepia. I want pure black and white. What can I do to fix this?
Brand new Pro 310 printer and trying to set it up but there seems to be an issue with either the print head. When I first powered it on and went through the initial setup, the auto print head alignment failed. When I printed the nozzle check none of ...
the screen on my imagePROGRAF PRO-1000 says the joint lever is not closed completely. sure looks like it is to me. does anyone have any suggestions ? thank you
It seems I am unable to print small sizes on this software/ Canon Pro 1000. I am only able to create smaller sizes and use them when selecting plain paper as my media type. I am looking to print fine art, more specifically on Hahnemuhle 4x6 Photo r...
I bought a second-hand Canon Pixma Pro 100S, but it didn’t come with any ink cartridges. Even when I open the printer cover, the cartridge doesn’t move into the centre. According to the manual, you’re not supposed to leave the printer with empty cart...
Hello to All, I bought a Canon Prograf 1000, and when I turned it on for the first time, it appeared an error message "Support Code 1881" which means that the head is not installed properly. This message should not even appear, because the setup wa...
I noticed a couple months ago that my prints were not being centered all the time. It appears to be a feeding problem but it could also be a printer head problem. Image is good quality but left and top edges are smaller and in one run of about 20 p...
Dear Canon Support Team,I am writing to formally express my dissatisfaction regarding the lack of driver support for my printer, the Canon PIXMA PRO-100S, on Windows 11 (version 25H2, 64-bit).This printer was a significant and expensive purchase for ...
Hello,Hoping I can get some help on this. I recently bought a used Canon Pro-300 printer. When I went to set it up, these two parts were laying on the bottom of the printer floor. Needless to say, I received a error message upon setup. The parts don'...
